Cubes I could kiss you !
Well...maybe a hug ? 
I don't do "hot racks" anymore ! 
RB
| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| T 18 with folding wing http://t18.net/thorpforum/viewtopic.php?f=10&t=7504 |
Page 1 of 1 |
| Author: | rrobut [ Sun Jan 19, 2014 8:51 am ] |
| Post subject: | T 18 with folding wing |
I am thinking of buying a T18 in Australia with a folding S18 wing that is badly damaged. Does anyone have a set of drawings for this wing that I can purchase to help in the reconstruction process. |
|
| Author: | James Grahn [ Sun Jan 19, 2014 6:02 pm ] |
| Post subject: | Re: T 18 with folding wing |
They will be available shortly. Cubes |
|
| Author: | Rich Brazell [ Sun Jan 19, 2014 9:29 pm ] |
| Post subject: | Re: T 18 with folding wing |
Cubes I could kiss you ! Well...maybe a hug ? I don't do "hot racks" anymore ! RB
|
|
| Author: | plexcom [ Fri Feb 07, 2014 7:20 am ] |
| Post subject: | Re: T 18 with folding wing |
Could you give more info on the soon to be available folding wing plans? Where will these be available? Thanks ! |
|
| Author: | James Grahn [ Fri Feb 07, 2014 6:17 pm ] |
| Post subject: | Re: T 18 with folding wing |
As soon as I own the business you will see a complete parts list for sale with a link on this website. Cubes |
|
| Author: | jfkenton [ Tue Jul 01, 2014 1:37 pm ] |
| Post subject: | Re: T 18 with folding wing |
I can run to the airport and measure it myself, but -- with all the knowledge out there -- does someone have the span of the airplane with the wing folded? I presume the T-18C would be a couple inches less than the S-18 due to the fuselage width. |
|
| Author: | jrevens [ Tue Jul 01, 2014 6:16 pm ] |
| Post subject: | Re: T 18 with folding wing |
I don't know the measurement, Jack, but it's the same wide-body or not. It's the wing center section that's the widest point (actually, the thickness of the outer panels is added to that). I looked at the drawing I have, & it shows the folded clearance point at BL 48.0, so it's right at 8 feet. |
|
| Author: | jfkenton [ Tue Jul 01, 2014 9:57 pm ] |
| Post subject: | Re: T 18 with folding wing |
Thanks, John. I keep getting asked and I thought that the info was somewhere here in the web site -- but if it is, I can't find it. So the next time someone asks I can tell him I have an 8' span with the folded wing. Plus the wing thickness as it sits alongside of things. |
|
| Author: | jrevens [ Tue Jul 01, 2014 11:26 pm ] |
| Post subject: | Re: T 18 with folding wing |
Just to clarify, Jack - it's 8' including the thickness of the folded wings. |
|
| Author: | Rich Brazell [ Fri Jul 04, 2014 4:56 pm ] |
| Post subject: | Re: T 18 with folding wing |
If it helps , I think my trailer (California Legal) is 106" wide at the tires .  RB 
|
|
| Author: | Rich Brazell [ Fri Jul 04, 2014 9:51 pm ] |
| Post subject: | Re: T 18 with folding wing |
Went out and measured the trailer , tire to tire and it is 102 inches . RB
|
|
| Author: | rrobut [ Wed Jul 30, 2014 9:56 pm ] |
| Post subject: | Re: T 18 with folding wing |
Any news when the S 18 plans will be available again. |
|
| Author: | James Grahn [ Wed Jul 30, 2014 10:21 pm ] |
| Post subject: | Re: T 18 with folding wing |
They are available now. Send me a PM and I'll get the process started. Cubes BTW, for everyone else, the business is coming on line now. Some parts may take longer than others, but you should see things improve quickly. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|