| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| throttle cable http://t18.net/thorpforum/viewtopic.php?f=19&t=6527 |
Page 1 of 1 |
| Author: | dcuke [ Mon Feb 21, 2011 11:44 am ] |
| Post subject: | throttle cable |
approximately How long of a throttle cable (vernier) should I be looking at getting for the t-18? I am trying to keep my eyes open on ebay for a good deal and would like to strike when the right one comes up. |
|
| Author: | fytrplt [ Mon Feb 21, 2011 4:06 pm ] |
| Post subject: | throttle cable |
If you plan to fly formation, forget the vernier throttle. Since each installation is different, you need to measure your particlar setup. |
|
| Author: | Les King [ Mon Feb 21, 2011 11:46 pm ] |
| Post subject: | throttle cable |
Dean, I have a vernier throttle cable left over from when I changed my T-18 to left hand throttle and mixture control. I live in Tehachapi, reasonably close to Visalia. You can come by and look at my old cables. If they are useful to you, you can have them for your favorite price. Les King N331A 661-822-9244, cel 661-972-0488 |
|
| Author: | Bill Williams [ Wed Feb 23, 2011 5:55 am ] |
| Post subject: | throttle cable |
You will find that each application will be a little different, depending on throttle control location and type of engine/carburator. I was luky enough to have two old ends about a foot long , mocked up the ends and measured the the length. Final note, use only Cablecraft cables and not the cheap ones from Aircraft Spruce. |
|
| Author: | davem [ Wed Feb 23, 2011 12:29 pm ] |
| Post subject: | throttle cable |
I have some vernier cables that I replaced on mine because of changing the location of the throttle and instrument panel. I would be willing to sell them pretty reasonably. I could measure them if you are interested. Contact me separate from the forum. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|