| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Fairings (Landing gear/Fuselage and Wheel Pant Fairings) http://t18.net/thorpforum/viewtopic.php?f=19&t=7249 |
Page 1 of 1 |
| Author: | rklatt [ Sat Mar 23, 2013 9:39 pm ] |
| Post subject: | Fairings (Landing gear/Fuselage and Wheel Pant Fairings) |
Can anybody provide some direction as to what fairings you all are using between the fuselage and the landing gear cover, and also for the wheel pant fairings. Where can they ordered ? Rob N119FF |
|
| Author: | Chasr263 [ Sat Mar 23, 2013 10:24 pm ] |
| Post subject: | Re: Fairings (Landing gear/Fuselage and Wheel Pant Fairings) |
I am fitting Van's pressure recovery wheel pants and gear leg fairings. I like that the brakes are covered and the quality is very good. Available from vans aircraft web site. As for the fuselage to gear leg fairing I am using the modeling clay and electrical tape method of fiberglass production. Lots of examples on web. If you don't like vans, aircraft spruce has a couple of different choices for 500x5. I also like the pants available on the F-1 Rocket site. Supposed to be faster than Vans cheeper too. |
|
| Author: | Ryan Allen [ Sun Mar 24, 2013 8:01 am ] |
| Post subject: | Re: Fairings (Landing gear/Fuselage and Wheel Pant Fairings) |
I think Classic Sport Aircraft sells them. I believe thats where I bought mine. |
|
| Author: | rklatt [ Sun Mar 24, 2013 9:09 am ] |
| Post subject: | Re: Fairings (Landing gear/Fuselage and Wheel Pant Fairings) |
Gents: Thank you for the responses ! Rob |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|