Thorp Air Command - T18.net
http://t18.net/thorpforum/

FI Fuel Pump - POWERCO E8845
http://t18.net/thorpforum/viewtopic.php?f=19&t=8500
Page 1 of 1

Author:  leewwalton [ Tue Jul 07, 2020 12:15 pm ]
Post subject:  FI Fuel Pump - POWERCO E8845

I was inquiring with David Read on smoke pumps the other day. He referred me to the unit he's using POWERCO E8845. Upon purchasing one ($45) I realized this pump is the basis for the Airflow Performance pump ($410).

With a tad bit of modification (plumbing/check valve) an aux high pressure pump could be fabricated for 10% of the asking price at Airflow.

Anyone with an Airflow Performance pump keep this in mind if something fails ... I just bought a spare to carry around with me. One downfall of FI ... can't really go anywhere without a boost pump.

Image

Image

Author:  James Grahn [ Tue Jul 07, 2020 1:03 pm ]
Post subject:  Re: FI Fuel Pump - POWERCO E8845

I wish I could say that I do not have any experience with that crappy design. They are the most fragile part of any system on any airplane I have ever been associated with. I STRONGLY suggest you have a very fine in line filter up stream of one of these pumps and that you clean it regularly.
Cubes

Author:  Jim Mantyla [ Thu Jul 09, 2020 10:24 am ]
Post subject:  Re: FI Fuel Pump - POWERCO E8845

Lee,

Nice work. Could you also create a parts list?

Regards,

Jim

Author:  leewwalton [ Thu Jul 16, 2020 8:01 pm ]
Post subject:  Re: FI Fuel Pump - POWERCO E8845

I’m going to clone one here in the next few weeks. In a nutshell this is what’s involved.
Image

Author:  James Grahn [ Thu Jul 16, 2020 8:22 pm ]
Post subject:  Re: FI Fuel Pump - POWERCO E8845

Just FYI, the Airflow Performance set up has a #70 hole drilled into the check valve for the purpose of bleeding the lines after shutdown.
Cubes

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/