| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Jack Screw Lubricant http://t18.net/thorpforum/viewtopic.php?f=2&t=6714 |
Page 1 of 1 |
| Author: | mattst18 [ Fri Aug 05, 2011 10:32 pm ] |
| Post subject: | Jack Screw Lubricant |
I have disassembled my jack screw / torque tube assembly and I have made a replacement 694 as the hole connecting to the torque tube was worn. I am wondering what is recommended for a lubricant when reassembling. Both for the jack screw and for the bearing blocks if different. Thanks |
|
| Author: | fytrplt [ Sat Aug 06, 2011 3:23 am ] |
| Post subject: | Jack Screw Lubricant |
Jonh Thorp recommended Lubriplate, but any good white grease will do. This stuff is available at car parts stores; it is used on door locks and hinges. |
|
| Author: | mattst18 [ Sun Aug 07, 2011 5:47 pm ] |
| Post subject: | Jack Screw Lubricant |
Hi Bob, Thanks for the info. I was able to find Lupriplat at the NAPA store so that is what I went with. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|