Thorp Air Command - T18.net
http://t18.net/thorpforum/

Hoerner wing tip construction
http://t18.net/thorpforum/viewtopic.php?f=24&t=7407		 Page 1 of 1
Author:  BobMoe [ Mon Sep 30, 2013 11:01 am ]
Post subject:  Hoerner wing tip construction
There is a video on you tube by Jeff Lange, showing how to build hoerner wing tips (Part 3).
It is a visual version of John Evans fine write-up of years ago.
I did like his use of aluminum tape as a guide.

http://www.youtube.com/watch?v=ULhZchv7ito

PS: I plan to keep the leftover foam, he discarded, to make my wing root faring.
You can make the hotwire cut, of the first half, in one piece by putting a nail in the foam block at the leading edge cord line. This will help guide the hotwire for the initial cut. This leftover foam can be used to cradle the airfoil better than the wood block he used when you hotwire the second half. (Old Rutan tricks)
Author:  SHIPCHIEF [ Mon Sep 30, 2013 1:42 pm ]
Post subject:  Re: Hoerner wing tip construction
Thanks for sharing, that was great.
I'm trying to figure out how to do that in Aluminum...without welding. :o
I was very interested to hear his opinion on the change in landing characteristics with the new tips.
My old round style tips must be about the wurst. ::)
Author:  BobMoe [ Tue Oct 01, 2013 5:31 pm ]
Post subject:  Re: Hoerner wing tip construction
Thanks, You might check with David Reed. He made a set for his T18. He was making a set of aluminum tips, also.

This is my favorite video, but it has nothing to do with Thorps.

http://www.youtube.com/watch?v=nGeKSiCQkPw

Bob
Author:  dan [ Tue Oct 01, 2013 6:23 pm ]
Post subject:  Re: Hoerner wing tip construction
I thought I wore that Video out BOB!!! The wife and I get a bang outta that Video, we are keepers of mans best friend,well, the dog runs the house and we just kinda work for him.......Dan
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/