Cubes asked that I post this for all Constant Speed operators ...
| Attachments: |
NYCO Introduction Letter.pdf [385.21 KiB]
Downloaded 2310 times |
| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Important Message from Hartzell http://t18.net/thorpforum/viewtopic.php?f=27&t=8422 |
Page 1 of 1 |
| Author: | leewwalton [ Wed Nov 13, 2019 1:27 pm ] | ||
| Post subject: | Important Message from Hartzell | ||
Cubes asked that I post this for all Constant Speed operators ...
|
|||
| Author: | James Grahn [ Mon Dec 02, 2019 6:02 pm ] |
| Post subject: | Re: Important Message from Hartzell |
Due diligence. I forwarded this letter to an FBO on my field. The IA asked if it would be ok to pull one zerk fitting and pump this new grease through. Here’s the answer from Hartzell. This new grease will ONLY be installed at a teardown. DO NOT mix this with the Aeroshell 6 that is currently in your prop!! They are not compatible. As you might have read, Hartzell will be using this in all new props after the first of the year. Cubes |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|