Thorp Air Command - T18.net
http://t18.net/thorpforum/

Wing Profile
http://t18.net/thorpforum/viewtopic.php?f=3&t=8303
Page 1 of 1

Author:  rrobut [ Fri Jan 11, 2019 1:41 am ]
Post subject:  Wing Profile

I am a little confused.
The nose rib drawing that came with the S 18 plans shows that the profile is the 63-412 airfoil with dotted lines towards the front indicating that these lines are for the LDS-4-212 airfoil.
However the profile sheet in the plans (for the LDS-4-212) does not seem to match when I try to plot the numbers on the plan drawing.
That is assuming that station 1 on the sheet is the leading edge of the nose rib.

Thanks for the help.

Rob

Author:  Jeff J [ Fri Jan 11, 2019 5:03 pm ]
Post subject:  Re: Wing Profile

Is it close enough that the scan could have gotten a little skewed and/or the paper changed size with humidity? I used to see both when I was into RC airplanes.

Author:  James Grahn [ Sun Jan 13, 2019 7:38 pm ]
Post subject:  Re: Wing Profile

Sorry. I’ve been out of pocket for a bit.
Although I’m not sure I can answer your question anyway. The S18 should be the LDS 4-212 airfoil. The station numbers are in reference to overall station, ie prop flange. Does that help?
Cubes

Author:  rrobut [ Mon Jan 14, 2019 6:42 am ]
Post subject:  Re: Wing Profile

Thanks Cubes. My question is answered. At least I know which profile to use

Rob

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/