| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Laminar Flow Hinge Fairings http://t18.net/thorpforum/viewtopic.php?f=3&t=8434 |
Page 1 of 1 |
| Author: | Andy475 [ Fri Dec 20, 2019 11:29 am ] |
| Post subject: | Laminar Flow Hinge Fairings |
So here is my most recent bad idea, send your spears! I recently read "Speed with Economy" by Kent Paser and keep looking over the Thorp for those small areas to clean up. Laminar Flow Systems manufactures stamped flap hinges (for Piper Cherokees) that mock up nicely on the Thorp. How much return will can we actually get? TBD, I am expecting a few mph at most, they claim 2.5 mph on the Cherokee. I'm working with them now to see if I can come up with a minimally intrusive way to test them and see how they work out. They do a good job of matching the Thorp curves at the very least! More to follow...probably will be a few months in the works with my current work schedule. Szekely, Andy https://laminarflowsystems.com/product/ ... gs-8-pair/ |
|
| Author: | fytrplt [ Fri Dec 20, 2019 11:48 am ] |
| Post subject: | Re: Laminar Flow Hinge Fairings |
$600 for some bits of formed aluminum! I'm coming out of retirement! |
|
| Author: | Andy475 [ Fri Dec 20, 2019 12:02 pm ] |
| Post subject: | Re: Laminar Flow Hinge Fairings |
Haha, good point. We don't need 8, and we don't need FAA paperwork which made them significantly cheaper... The owner sent me a rejected set for experimenting. -Andy |
|
| Author: | fytrplt [ Fri Dec 20, 2019 12:03 pm ] |
| Post subject: | Re: Laminar Flow Hinge Fairings |
Great! Standing by for the report. |
|
| Author: | leewwalton [ Sat Dec 21, 2019 10:52 am ] |
| Post subject: | Re: Laminar Flow Hinge Fairings |
I ran the "flap hinge" idea by my dad and Lou Sunderland as a kid over dinner one year at SnF in the '80s. As I recall they both appreciated my optimism but convinced me that the minuscule frontal area of the hinge and the angle by which it apposes the air was not worth the effort. Hate to lean towards bursting anyone's bubble but the air frame itself only goes so fast on so much HP ... if you want to go faster up the CI and or HR. Keep in mind that the red line is 210 regardless ... a lot of us are limited by that. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|