Thorp Air Command - T18.net

I just ordered a nexus 7 to replace my phone for running naviator in the airplane.. i was Velcroing the phone to the panel but the nexus is bigger and heavier. .. i would like a mount that attaches to the panel...

Who's using what?

Thanks

Here's what I'm using Tim ...

http://www.rammount.com/NewProducts/Goo ... fault.aspx

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD

Thanks Lee.... do I understand correctly. ...
its just a suction cup holding the arm on the panel...
it seems destined to fail and fall to the cabin floor..

Any pictures?

Tim, That's a RAM mount ... they offer numerous attach methods, take your pic. Mine is mounted to the panel with 4 MS and nutplates.

Lee

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD

Roger.... checking again... Thanks

I have a Nexus 7 (2nd edition 2013). I printed a two piece, slide on case and put "velcro" on the back of each piece. Then I cut and bent aluminum, mounted those pieces to the panel and put "velcro" in the appropriate spots. I slide the case on to the tablet and then press the tablet & case into place on the mount.

The "velcro" is actually a Scotch brand All Weather Fastener that I bought at Target. It's a little tricky to get the tablet & case back off the mount, you just have to go slow and be patient.

_________________
Brian Cabebe
N39JP

I used a tablet mount like the one on Ebay Item 390890612043. I removed the suction cup, using a 10-32 screw mounted it to the panel. Hplds my Samsung Tab 7" great.