Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Nov 10, 2024 2:18 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
James Grahn
PostPosted: Mon Jul 23, 2012 9:22 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1460
Images: 0
Location: USA
Anyone have a conditional inspection checklist they would like to share?


Top
 Profile Personal album  
 
James Grahn
PostPosted: Mon Jul 23, 2012 4:20 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1460
Images: 0
Location: USA
Beuhler? beuhler?


Top
 Profile Personal album  
 
dickwolff
PostPosted: Mon Jul 23, 2012 5:26 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 499
Images: 6
Location: Canada
I think they all buggered off to OSH.

I will email you what I've collected.

d


Top
 Profile Personal album  
 
dan
PostPosted: Mon Jul 23, 2012 5:58 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Hi Cubes, I have done 3 conditionals as I have been flying the Thorp for bout 4 yrs. I do inspections all year long, my brakes get inspected 4 times a year,I have to remove my wheel pants to air the tires so I always do an inspection. I check my oil just about every second or third time I go flying depending on how much I have been flying. I pull the cheeks and do a inspection on everything firewall forward,and a little wipin and cleaning.I guess I pretty much watch and take care of things during the year to the point that when it comes annual, I do compression,mag timing, E-gap setting and I look at the controls,bel cranks pushrods cables and such. They are always right where I left them the year before, kinda strange huh. I can honestly say the thig shows no sign of wear in 4 years,however I did do a tube and tire change, riveted on new brake pads and packed wheel bearings while I was at it for good measure. I don't have a list, but my logbook will report everything that has been done and when. I do the conditional every Nov, the rest of all of the lookin at this and that happens just about every weekend, I guess I'm Phobic about it...........Dan


Top
 Profile  
 
James Grahn
PostPosted: Mon Jul 23, 2012 7:59 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1460
Images: 0
Location: USA
I guess so. I will compile one from RBs and Dicks e mails. Thanks guys.


Top
 Profile Personal album  
 
Rich Brazell
PostPosted: Mon Jul 23, 2012 8:11 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3105
Images: 64
Location: Jamul, CA (San Diego area)
Dan: Why not install an access door on the pant to check the air ? Here is what I did. I use a 1/4" extension and socket to remove the cap. I found an American made pencil air pressure gauge on Amazon. Very accurate. Need to put a "dot" on the tire to know when the tire and valve are in the door. Only took me about an hour to do both pants. Had to put a doubler for the pant attach screw anyway.

RB
Attachment:
Final painting 001.jpg
Final painting 001.jpg [ 1.36 MiB | Viewed 18112 times ]


Top
 Profile Personal album  
 
dan
PostPosted: Mon Jul 23, 2012 8:58 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
I use the removal of the Pant for lookin at stuff Rich, your set up is clean and neat. It's probably no trouble to check your air also. I made the pant mounts user friendly so it just takes a minute to remove them......Dan


Top
 Profile  
 
James Grahn
PostPosted: Mon Jul 23, 2012 10:17 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1460
Images: 0
Location: USA
Don, I don't know how to reply to a private message. My e mail is cubes@cox.net. Thanks


Top
 Profile Personal album  
 
Victor J Thompson
PostPosted: Thu Jul 26, 2012 8:33 am 
Jr. Member
Jr. Member
User avatar

Joined: Wed Jul 18, 2012 12:16 pm
Posts: 71
Images: 70
Location: Merrickville, Ontario, Canada
James: Sorry James I do not have a T-18 specific annual or conditional check list for you.
Went on line as you probley did and didn't see one there for our aircraft.
We may have it in a newsletter or stored archives of the old site, however here is what I found.
Here is a couple of annual / conditional editable check lists in both RV site from the RV group.
http://www.vansairforce.com/community/s ... hp?t=36093
http://www.vansairforce.com/community/s ... php?t=5743

Another editable one, scroll down to the bottom.
http://www.hangara13.com/RV-12Project.html

Non edit one
http://www.rainbowaviation.com/far_43_appd_d.htm

And finally, in Canada MD-RA is the Minister's Deligate - Recreational Aircraft the organization that inspects homebuilt aircraft in Canada, under builders info it list Part 1 and Part 2 standards we Canadians have to follow.
http://www.md-ra.com/en/
Cheers

_________________
Victor J Thompson
C-GIRQ
In memory of Dad


Top
 Profile Personal album  
 
Victor J Thompson
PostPosted: Thu Jul 26, 2012 8:41 am 
Jr. Member
Jr. Member
User avatar

Joined: Wed Jul 18, 2012 12:16 pm
Posts: 71
Images: 70
Location: Merrickville, Ontario, Canada
James just a note on the last site.

Under builders info, then go to Operating and maintaining an amateur-built aircraft which will lead you to Guide to maintenance schedule
and this link gives you what we in Canada have to tailor our annuals/ conditional inspections too.

Hope this helps you.

_________________
Victor J Thompson
C-GIRQ
In memory of Dad


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.141s | 14 Queries | GZIP : On ]