Goodness ! With that kind of efficiency you should be in Government !
RB
| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| 0290G to a 0-360A1G6D http://t18.net/thorpforum/viewtopic.php?f=35&t=6932 |
Page 1 of 1 |
| Author: | flychris [ Tue Feb 14, 2012 8:22 pm ] |
| Post subject: | 0290G to a 0-360A1G6D |
Done several engine swaps but this will be the first on a thorp! Goal is 3 weeks start to finish with two full time jobs. Corprate pilot and running a maintenance shop. I will try to pust updates and please any tips please speak up! Can't upload the pic from my iPhone but took the engine off today I between some jobs about 2 hrs total. Chris |
|
| Author: | Rich Brazell [ Tue Feb 14, 2012 8:44 pm ] |
| Post subject: | Re: 0290G to a 0-360A1G6D |
Goodness ! With that kind of efficiency you should be in Government ! RB |
|
| Author: | Ryan Allen [ Wed Feb 15, 2012 2:27 pm ] |
| Post subject: | Re: 0290G to a 0-360A1G6D |
Chris-if you end up wanting to sell that prop that came with the 0-290, I would be interested to talk to you about it. I think my prop has a little too much pitch on it and Im looking to find a good cruise prop. |
|
| Author: | flychris [ Wed Feb 15, 2012 9:40 pm ] |
| Post subject: | Re: 0290G to a 0-360A1G6D |
Sold the 0290 and prop! Out with the old Attachment: thorp290.JPG [ 1.84 MiB | Viewed 7555 times ] In with the new! 0360 Installed! Had to pull the rear facing sump off and Just so has it my buddy needs it for his hiper bipe and has a front facing sump! Attachment: thorp1.JPG [ 1.79 MiB | Viewed 7555 times ] Chris Cox Altanta, Ga |
|
| Author: | flychris [ Wed Feb 15, 2012 9:45 pm ] |
| Post subject: | Re: 0290G to a 0-360A1G6D |
Ray, Sold the FF with everything for $2K it was making metal is what the last owner said. I didnt even check because i had the 360 in the hangar. |
|
| Author: | Doug S [ Thu Feb 16, 2012 9:41 am ] |
| Post subject: | Re: 0290G to a 0-360A1G6D |
Where in Atlanta are you? I am headed to Stockbridge / Morrow next week & will be flying into Berryhill (4A0). If timing works right we can get you some stick time if you want. |
|
| Author: | flychris [ Thu Feb 16, 2012 10:37 am ] |
| Post subject: | Re: 0290G to a 0-360A1G6D |
I would love to if I'm not out on a trip. The plane is at Tara (4a7) which is right down the road fron b-hill. I used to fly out of there and have friends that have planes there. I live closer to there than my hangar but couldnt get customers to fly in there for maintenance. Let me know when you will be around I'd love to come look and get some ideas! Chris 4046973069 |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|