Thorp Air Command - T18.net
http://t18.net/thorpforum/

Firewall forward hose lengths?
http://t18.net/thorpforum/viewtopic.php?f=35&t=7176		 Page 1 of 1
Author:  Ryan Allen [ Wed Dec 12, 2012 8:20 pm ]
Post subject:  Firewall forward hose lengths?
I realize my questions are getting voluminous, but if anyone has the lengths of various hoses a person would need with a carburated 360, I sure woule like to get that from you so I can make an order from aircraft spruce and have everything on hand.

Another question too. The lord mounts says it take an AN 7 bolt, but does anyone know what length I need?
Author:  Rich Brazell [ Wed Dec 12, 2012 8:30 pm ]
Post subject:  Re: Firewall forward hose lengths?
Hose length ? Each AC is going to have a slightly different set up . It depends where the firewall pass thru occurs for the fuel , gascolator location, etc.? I waited until all the pieces were in place then measured and made my own hoses . Oil hoses included . Be careful on the premade hoses , I think it is like electrical stuff...no returns if they made the hose too short (based on your measurements ).

RB O0
Author:  Ryan Allen [ Wed Dec 12, 2012 9:05 pm ]
Post subject:  Re: Firewall forward hose lengths?
yea, that was shameful of me...but I thought I would ask, just in case.
Author:  Rich Brazell [ Wed Dec 12, 2012 10:18 pm ]
Post subject:  Re: Firewall forward hose lengths?
Ask away ! The one question you don't ask may bite you in the Arse ! ;D I don't think we have too many secrets in this Community (unless it's..."What Happens in Vegas , Stays in Vegas !") ? That's how we learn .

RB O0
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/