Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Nov 10, 2024 2:29 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
Stroid
 Post subject: prop diameter
PostPosted: Fri Dec 23, 2022 12:44 pm 
Newbie
Newbie

Joined: Wed Apr 13, 2022 12:49 pm
Posts: 3
why are most thorps 66 or 68in? i know a guy with a 72 and he does fine. does a longer prop decrease cruise? is a longer prop worse for aerobatics due to higher gyro forces?


Top
 Profile  
 
fytrplt
 Post subject: Re: prop diameter
PostPosted: Fri Dec 23, 2022 3:44 pm 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1149
Images: 2
Location: Lakeland, Florida, USA
Fixed or CS? Hartzel doesn't recommend less than 72" due to harmonics. Interested to know what aerobatics you are contemplating.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
Stroid
 Post subject: Re: prop diameter
PostPosted: Fri Dec 23, 2022 5:43 pm 
Newbie
Newbie

Joined: Wed Apr 13, 2022 12:49 pm
Posts: 3
fixed pitch. nothing fancy just basic stuff.

let me rephrase: are there any downsides to a longer prop as long as tip speed and ground clearance are maintained?
i know a longer prop will make more thrust and thus better climb. will it increase drag and thus slow cruise?
or just stick with "keep it as long as possible for as long as posshble"?


Top
 Profile  
 
bfinney
 Post subject: Re: prop diameter
PostPosted: Fri Dec 23, 2022 7:05 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 2:24 pm
Posts: 504
Images: 6
Location: Yelm, WA USA
I have a 68" prop, with the original "short" gear I had 6-7" ground clearance so that's reason #1, I also have an O290 140HP motor, reason #2, makes it easier for the motor to make rated power, bigger motor can swing a bigger prop. I've since replaced the gear with the "long" gear, 4" longer legs with an increased ground clearance of 10-11".

_________________
Bruce Finney
N18JF T-18C #262
Yelm, WA USA


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: prop diameter
PostPosted: Fri Dec 23, 2022 7:34 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1460
Images: 0
Location: USA
I have found that longer props require more horsepower to turn, by a lot! On the flip side, with the same motor, a longer prop will make your motor work harder. As far as cruise speed, it depends more on the airfoil. If you ask Catto, they will tell you shorter is faster.
Aerobatics are much easier in a CS than FP. You get more vertical penetration and it keeps you from over speeding on the down line. But they are heavier.
Cubes


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.161s | 10 Queries | GZIP : On ]