Go to my gallery pics and you can see my remote oil filter set up I used for my 0-360 . No problems after 14 years !
Rich Brazell
NX115RX
2019
| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Dynafocal Engine Mount http://t18.net/thorpforum/viewtopic.php?f=35&t=9081 |
Page 1 of 1 |
| Author: | rrobut [ Thu Nov 21, 2024 7:13 am ] |
| Post subject: | Dynafocal Engine Mount |
For those of you running an O-360 with the dynafocal mount Did you have to use a remote oil filter or did you have enough room in front of the firewall for the rear mounted filter. The project that I have has a dynafocal mount with it but there does not seem to be room for the filter. I dont know what engine was intended to be fitted. I have an O-360. I haven't tried to fit it yet as I am not ready for that. |
|
| Author: | Rich Brazell [ Thu Nov 21, 2024 11:15 am ] |
| Post subject: | Re: Dynafocal Engine Mount |
Go to my gallery pics and you can see my remote oil filter set up I used for my 0-360 . No problems after 14 years ! Rich Brazell NX115RX 2019 |
|
| Author: | Rich Brazell [ Thu Nov 21, 2024 11:17 am ] |
| Post subject: | Re: Dynafocal Engine Mount |
|
|
| Author: | Ryan Allen [ Thu Nov 21, 2024 5:21 pm ] |
| Post subject: | Re: Dynafocal Engine Mount |
I copied Rich. Its great in that position. |
|
| Author: | rrobut [ Thu Nov 21, 2024 8:38 pm ] |
| Post subject: | Re: Dynafocal Engine Mount |
Thanks for the replies. It looks great. Much easier for filter changes that rear mounted. |
|
| Author: | Rich Brazell [ Thu Nov 21, 2024 9:45 pm ] |
| Post subject: | Re: Dynafocal Engine Mount |
YES...Muey Bueno ! Much less of a mess than trying to change the filter on the back of the engine ! RB NX115RX 2019 |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|