Thorp Air Command - T18.net
http://t18.net/thorpforum/

T18 Project - N772DM
http://t18.net/thorpforum/viewtopic.php?f=36&t=6898		 Page 1 of 3
Author:  dcuke [ Fri Jan 13, 2012 11:45 pm ]
Post subject:  T18 Project - N772DM
N772DM is an unfinished T18 project that I am completing. Dan Eggleston found this diamond in the rough hiding out in Steve Dillard's hangar in Visalia. It had been there for over 10 years and before that I think it had moved around the central California area. It was originally started in 1964 by an engineer from Lockheed named Harry Keane. I believe Tom Hunter knew him. The serial number that John Thorp gave Harry for this project is #133.

When I took it off Steve's hands I had many of the pieces, but most of the riveting still needed to be done. I had a really good frame work and foundation to deal with.

I have been working on this bird everyday & night for the past 15 months and am hoping to have this flight ready sometime in March or April. Wish me luck.

I want to thank Dan for his encouragement, expertise and helpful hands. Without him I'd still be starring at a bunch of un-riveted pieces.

I am going to try and post some pics in chronological order for you all to see the progress

Attachments:
IMAG0669.jpg
IMAG0669.jpg [ 1.14 MiB | Viewed 18636 times ]
IMAG0647.jpg
IMAG0647.jpg [ 1.25 MiB | Viewed 18636 times ]
IMAG0645.jpg
IMAG0645.jpg [ 1.25 MiB | Viewed 18636 times ]
IMAG0642.jpg
IMAG0642.jpg [ 1.16 MiB | Viewed 18636 times ]
IMAG0641.jpg
IMAG0641.jpg [ 1.52 MiB | Viewed 18636 times ]
Author:  dcuke [ Fri Jan 13, 2012 11:50 pm ]
Post subject:  Re: T18 Project - N772DM
Some more pics

Attachments:
IMAG0663.jpg
IMAG0663.jpg [ 1.27 MiB | Viewed 18634 times ]
IMAG0660.jpg
IMAG0660.jpg [ 1.14 MiB | Viewed 18634 times ]
IMAG0658.jpg
IMAG0658.jpg [ 1.09 MiB | Viewed 18634 times ]
IMAG1120.jpg
IMAG1120.jpg [ 1.16 MiB | Viewed 18634 times ]
Author:  dcuke [ Fri Jan 13, 2012 11:55 pm ]
Post subject:  Re: T18 Project - N772DM
some more pics

Attachments:
IMAG1589.jpg
IMAG1589.jpg [ 1.46 MiB | Viewed 18633 times ]
IMAG0655.jpg
IMAG0655.jpg [ 1.14 MiB | Viewed 18633 times ]
IMAG0653.jpg
IMAG0653.jpg [ 951.98 KiB | Viewed 18633 times ]
IMAG1599.jpg
IMAG1599.jpg [ 1.04 MiB | Viewed 18633 times ]
IMAG0640.jpg
IMAG0640.jpg [ 1.07 MiB | Viewed 18633 times ]
IMAG0643.jpg
IMAG0643.jpg [ 1.16 MiB | Viewed 18633 times ]
IMAG0669.jpg
IMAG0669.jpg [ 1.14 MiB | Viewed 18633 times ]
IMAG1596.jpg
IMAG1596.jpg [ 854.82 KiB | Viewed 18633 times ]
IMAG1125.jpg
IMAG1125.jpg [ 1.32 MiB | Viewed 18633 times ]
Author:  dcuke [ Sat Jan 14, 2012 12:01 am ]
Post subject:  Re: T18 Project - N772DM
and some more pics. It looks as though and I am not putting them all in a chronological order, but it is close.

Attachments:
IMAG0201.jpg
IMAG0201.jpg [ 1.19 MiB | Viewed 18633 times ]
File comment: Found a black hide and a tan hide on ebay. Used them for the seats and the interior panels
IMAG0200.jpg
IMAG0200.jpg [ 1.36 MiB | Viewed 18633 times ]
IMAG1622.jpg
IMAG1622.jpg [ 1.47 MiB | Viewed 18633 times ]
File comment: O-290 GPU that came out of a EAA bi-plane. 400 hours smoh
IMAG1617.jpg
IMAG1617.jpg [ 1.4 MiB | Viewed 18633 times ]
IMAG1616.jpg
IMAG1616.jpg [ 1.36 MiB | Viewed 18633 times ]
Author:  dcuke [ Sat Jan 14, 2012 12:11 am ]
Post subject:  Re: T18 Project - N772DM
I will most more pics later. My phone battery just died and my pics are hiding in there.

Attachments:
IMAG2018.jpg
IMAG2018.jpg [ 631.63 KiB | Viewed 18633 times ]
File comment: got tired of spending a small fortune, so I built my own Carb Heat box from Dan Eggleston's design
IMAG2015.jpg
IMAG2015.jpg [ 572.35 KiB | Viewed 18633 times ]
IMAG1797.jpg
IMAG1797.jpg [ 543.57 KiB | Viewed 18633 times ]
File comment: a little do-ma-hickey I made to put over the flap bar to keep your leg from getting poked
IMAG1793.jpg
IMAG1793.jpg [ 553.49 KiB | Viewed 18633 times ]
IMAG1795.jpg
IMAG1795.jpg [ 496.82 KiB | Viewed 18633 times ]
IMAG1768.jpg
IMAG1768.jpg [ 515.07 KiB | Viewed 18633 times ]
IMAG1730.jpg
IMAG1730.jpg [ 534.97 KiB | Viewed 18633 times ]
IMAG1601.jpg
IMAG1601.jpg [ 1.42 MiB | Viewed 18633 times ]
IMAG1727.jpg
IMAG1727.jpg [ 485.48 KiB | Viewed 18633 times ]
Author:  dcuke [ Sat Jan 14, 2012 1:16 am ]
Post subject:  Re: T18 Project - N772DM
a few more pics. Project near completion. Just need to finish up the canopy/mount the alternator/ finish up the exhaust (Dan's job. lol) / put the prop & spinner on and..... VIOLA!

Attachments:
IMAG2025.jpg
IMAG2025.jpg [ 581.7 KiB | Viewed 18630 times ]
IMAG2035.jpg
IMAG2035.jpg [ 470.72 KiB | Viewed 18630 times ]
IMAG2041.jpg
IMAG2041.jpg [ 467.19 KiB | Viewed 18630 times ]
IMAG2026.jpg
IMAG2026.jpg [ 540.4 KiB | Viewed 18630 times ]
IMAG2045.jpg
IMAG2045.jpg [ 468.23 KiB | Viewed 18630 times ]
File comment: kept the avionics simple, clean but powerful. have the bluemountain EFIS/ IPAD2-3G w xwingpro7/ gtx327 transponder/ MGL v10 com/ digital fuel gauge/ digital oil pressure gauge.
IMAG2039.jpg
IMAG2039.jpg [ 460.24 KiB | Viewed 18630 times ]
File comment: put the battery in the baggage compartment behind the passenger seat. I recessed the battery (sits on the the floor of the fuselage below the the baggage floor so that I have more room
IMAG2031.jpg
IMAG2031.jpg [ 616.11 KiB | Viewed 18630 times ]
File comment: Finished the carb heat box. Thanks Dan for the idea
IMAG2046.jpg
IMAG2046.jpg [ 376.58 KiB | Viewed 18630 times ]
IMAG2021.jpg
IMAG2021.jpg [ 497.49 KiB | Viewed 18630 times ]
Author:  leewwalton [ Sat Jan 14, 2012 11:43 am ]
Post subject:  Re: T18 Project - N772DM
Holy chromatron!! That thing looks great!! So good to see another 2000's era Thorp on the way out of the barn! The carbon fiber overlay panel is a great touch, as are the seats!
Author:  Rich Brazell [ Sat Jan 14, 2012 12:41 pm ]
Post subject:  Re: T18 Project - N772DM
Holy Batman ! C:-) Lookin good Billy Ray ! ;) EFIS panel looks mighty fine. BTW...do you have a real job or is this your full time job ? Having Dan as a "helper" doesn't hurt either !

RB
Author:  dcuke [ Sat Jan 14, 2012 4:56 pm ]
Post subject:  Re: T18 Project - N772DM
Contrary to popular belief, I do work full-time. I just have a very understanding wife who is willing to put up with my projects. Although, she will be very happy to see this one leave the garage soon.

I also could never have gotten this far without Dan's helping hands and frequent drop-ins.
Author:  dan [ Sat Jan 14, 2012 10:36 pm ]
Post subject:  Re: T18 Project - N772DM
Ok all, now then, let's give Mr. Dean Cuke credit where credit is due. When Dean hauled this project away from the airport it needed a lot do work, it had just sat in the corner of a hanger like he said for years, all the whilst other projects had been in progress for years. Dean jumped on this thing like a hungry termite on a 2x4, he hasn't wavered in his dedication for completion even though he is one of the buisiest people I know and his responsibilities most folks would run and hide from. he has worked hard on this project and will complete the thing before the guys that had a 5yr head start on him. He hasn't realized yet that he is a craftsman, his work is outstanding and his fortitude second to none. Dean will have this bird airborne probably in the next 90 to 120 days, go figure, do the math. He has been at it for about 15 months, flying Thorp in less than 2 years, OOOOORA!! Now then, the truth is out!!!! now they know Deano!! You are the machine!! The rascal of riveting!! you and Mr.Zemeno are going to make us proud and we are glad to have ya.........Dan
Author:  Rich Brazell [ Sun Jan 15, 2012 8:20 pm ]
Post subject:  Re: T18 Project - N772DM
Believe me, Dean has all my respect for tackling this project and then some ! ;) Anyone that has a full time job and can finish a homebuilt A/C has my attention ! :) I did not finish NX115RX until I retired from 3 house moves and 2 retirements ! O0 Dan...you were my sunshine to keep me moving to finish my A/C ! ::) I thank you for the help and late nite phone calls ! :)

RB
NX115RX
Author:  dan [ Sun Jan 15, 2012 9:41 pm ]
Post subject:  Re: T18 Project - N772DM
Thanks Rich, I get a charge outa watching new birds take flight. When Iras plane flew I think I was as exited as he was!!! now Deans is all but there and ready to go!!! When we got word that you and yours had taken flight we had a celebratory Taco dinner to celebrate!!! Even for the guys that buy a project that has already flown, I get exited about that also. Good things happening at KVIS, there will be 3 Thorps here flying!! The entire thorp group has been good to answer questions for the new Thorpers this keeps the ball rolling on projects, whether it is a fresh build, partial build, or a modify. You all are appreciated and held in hi regard by the Thorp folks here at KVIS...Dan
Author:  dcuke [ Mon Apr 09, 2012 5:36 pm ]
Post subject:  Re: T18 Project - N772DM
Just had the weight and balance done today. Weighed in at 831 lbs (empty weight). Just have to get the paper work submitted this week and wait for the inspection.... then as RB would say "Badda Bing Badda Boom"
Author:  dcuke [ Mon Apr 09, 2012 5:48 pm ]
Post subject:  Re: T18 Project - N772DM
couple of pics out in the driveway after w&b

Attachments:
ready1.jpg
ready1.jpg [ 521.83 KiB | Viewed 18343 times ]
IMAG2251.jpg
IMAG2251.jpg [ 533.71 KiB | Viewed 18343 times ]
Author:  dan [ Mon Apr 09, 2012 7:26 pm ]
Post subject:  Re: T18 Project - N772DM
Come on Deno, tell em what it weighed in at, I ain't going to tell em you haft a do it!!! Dan
Page 1 of 3 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/