Thorp Air Command - T18.net
http://t18.net/thorpforum/

my project
http://t18.net/thorpforum/viewtopic.php?f=36&t=7759
Page 2 of 3

Author:  dan [ Wed May 13, 2015 7:35 am ]
Post subject:  Re: my project

Oh, by the way, when Ira had those decals built, he had them built from high horsepower material, so they will add 5 horse power to any plane that they are installed on!!! (well, 4 hp to an RV if the owner also owns a thorp) Not really just kiddin, but they sure do look fine dont they!.......Dan

Author:  Scott [ Fri May 15, 2015 12:17 am ]
Post subject:  Re: my project

decals are great!!!
Image

Author:  mattst18 [ Sun May 17, 2015 7:29 am ]
Post subject:  Re: my project

I like your N#. Looks like Not for Boys. I assume that was intentional?

Author:  Bill Williams [ Sun May 17, 2015 5:21 pm ]
Post subject:  Re: my project

This is the fuselage from a Thorp S18 damaged from the tornado at Sun n Fun back in 2011.
Duke and I rebuilt the fuselage and its ready for the gear leg.
Image

Author:  Scott [ Mon May 18, 2015 2:02 pm ]
Post subject:  Re: my project

It was.... I have 4 Boys. thanks

Author:  Scott [ Tue Jun 02, 2015 11:52 pm ]
Post subject:  Re: my project

thank you everyone for you help and complements. I have weighed the plane and came in at 929lbs. I have ran the C.G. limits and most fwd CG was 64.5 and most aft CG with 100lbs in luggage and 5 gal of fuel with 400 lbs plt/coplt cam in at 69.9. The CG limits that I was given by Eklund Engineering was 62.5 - 72.0. With that said I am well within limits. Also I get my operating limitations, airworthy cert and builders cert tomorrow and should have my first flight on Friday. I have had several ground runs and no issues or leaks. thanks once again and I will let you know how it goes.

Last thing, I want to thank the Janzen family for there support and making this possible for me. Thank you all.
Image

Author:  Fraser MacPhee [ Wed Jun 03, 2015 7:34 am ]
Post subject:  Re: my project

Many congrats Scott!!......looking forward to hearing the phase 1 results.

Author:  Rich Brazell [ Wed Jun 03, 2015 2:34 pm ]
Post subject:  Re: my project

Another one leaving the nest ! 8) Well done ! :)

RB O0

Author:  Ryan Allen [ Wed Jun 03, 2015 6:26 pm ]
Post subject:  Re: my project

thats got to be a good feeling. congrats!

Author:  Scott [ Fri Jun 05, 2015 9:12 pm ]
Post subject:  Re: my project

First flight today and She's a flyer!!!!!!!!!!!!!!!!!!!!!!

Author:  Lou [ Fri Jun 05, 2015 9:48 pm ]
Post subject:  Re: my project

Hell ya!

Author:  Scott [ Fri Jun 05, 2015 11:02 pm ]
Post subject:  Re: my project

N480YS first flight, KREI (Redland, Ca)
Image

Author:  N89BJ [ Fri Jun 05, 2015 11:14 pm ]
Post subject:  Re: my project

Congratulations Scott! Wish I could have hung around the airport a bit longer today to see it fly. How long did you keep it in the air? Did it fly straight and level? Again, great job.

Author:  Rich Brazell [ Fri Jun 05, 2015 11:37 pm ]
Post subject:  Re: my project

Looks like you'll be ready for Sedona next year ! 8)

RB O0

Author:  jrevens [ Sat Jun 06, 2015 1:24 am ]
Post subject:  Re: my project

That's just great, Scott! Enjoy your wonderful accomplishment... take it slow & careful, and have fun!

Page 2 of 3 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/