Thorp Air Command - T18.net
http://t18.net/thorpforum/

Help with parts ID
http://t18.net/thorpforum/viewtopic.php?f=36&t=8807
Page 1 of 1

Author:  Rv3maker [ Wed Nov 22, 2023 10:58 pm ]
Post subject:  Help with parts ID

Greetings!

I picked up a very complete S-18 project that was owned by Al Pereira from Austin, TX (later moved to Tuscon in late 90's.). I am very excited to get started and pick up where he left off but currently doing my due diligence and doing an inventory of parts and review of all the plans and additional supplements (wow there is a lot).

The project includes some spare parts as well as some T-18 parts. As I work through the plans I have run across a few parts that are not marked. I was hoping that some of you might recognize these parts. I believe the steel parts might be for the flaps/spring attachment(?). Any insight as to what these opposite aluminum pieces might be? They are punch/dimpled but no markings.

Any help is appreciated....with enough time I will find them...

Rob (rv3maker)


Image

Image

Author:  James Grahn [ Thu Nov 23, 2023 2:34 am ]
Post subject:  Re: Help with parts ID

Those small angles of 4130 go on the ailerons. They are used to stiffen the area to support the counterbalance weight
Cubes

Author:  Rv3maker [ Thu Nov 23, 2023 8:41 am ]
Post subject:  Re: Help with parts ID

Copy that . . .found them, dwg 558.

Thanks Jim!

Author:  Ryan Allen [ Thu Nov 23, 2023 10:03 am ]
Post subject:  Re: Help with parts ID

like you said, you will figure out what those bigger parts are when it comes time to make them in your build. When you figure it out, now you have to come back here and update us.

Author:  James Grahn [ Thu Nov 23, 2023 11:18 am ]
Post subject:  Re: Help with parts ID

I believe the aluminum parts are flap ribs.
Cubes

Author:  James Grahn [ Thu Nov 23, 2023 11:19 am ]
Post subject:  Re: Help with parts ID

Wrote “flap” mind was saying aileron. Sorry.
Cubes

Author:  Rv3maker [ Tue Dec 12, 2023 12:39 pm ]
Post subject:  Re: Help with parts ID

Okay. Coming along well with parts inventory and prep for jumping in on finishing the inner wing.

A couple more mystery parts that I found. They have holes as well as some punch marks for an additional row of fasteners. Ideas? I was thinking maybe wheel pant parts...but could not find them on drawings.

Rob
Image

Author:  Ryan Allen [ Tue Dec 12, 2023 6:49 pm ]
Post subject:  Re: Help with parts ID

definitely wheel pant mounts.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/