Thorp Air Command - T18.net
http://t18.net/thorpforum/

How do You make a front spinner bulkhead?
http://t18.net/thorpforum/viewtopic.php?f=47&t=8612
Page 1 of 1

Author:  Ryan Allen [ Sun May 02, 2021 4:29 pm ]
Post subject:  How do You make a front spinner bulkhead?

How do you make a front spinner bulkhead? I have a spinner and rear bulkhead, but I don't have a front bulkhead.

Author:  Ryan Allen [ Sun May 02, 2021 4:39 pm ]
Post subject:  Re: How do You make a front spinner bulkhead?

Just looked on Thorp Central. There are 3 front bulkheads listed. Part # 5041-3 (Front Plate 5-1/2"). Cubes, is the 5-1/2" listed in the description the radius of the front bulkhead?
Here is a link:
https://thorpcentral.com/catalog/prop.html

Author:  James Grahn [ Sun May 02, 2021 7:42 pm ]
Post subject:  Re: How do You make a front spinner bulkhead?

The dimension is for the thickness of the prop hub.
I currently only have 3 9/16ā€ in stock (as well as CS ones). The 4.5ā€ should be done any day. Bad news is Iā€™m shocked at how much the price of manufacturing went up.
Cubes

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/