I believe Bernie has the nosebowl you ask about
| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Aircraft Spruce MC-4 nose cowl? http://t18.net/thorpforum/viewtopic.php?f=5&t=8259 |
Page 1 of 1 |
| Author: | Cook11 [ Thu Aug 16, 2018 4:33 pm ] |
| Post subject: | Aircraft Spruce MC-4 nose cowl? |
Can anyone supply me some pictures of what the Aircraft Spruce MC-4 nose cowl looks like? Also what prop spinner fits this nose cowl? Thanks! |
|
| Author: | Jeff J [ Fri Aug 17, 2018 7:48 am ] |
| Post subject: | Re: Aircraft Spruce MC-4 nose cowl? |
I hope this helps: https://www.skyshop.com.au/pdf/2009-201 ... %20196.pdf |
|
| Author: | Hagle347 [ Fri Aug 17, 2018 3:18 pm ] |
| Post subject: | Re: Aircraft Spruce MC-4 nose cowl? |
I’m sure Cubes has the appropriate spinner for this application whether you go fixed pitch or constant speed T |
|
| Author: | Hagle347 [ Fri Aug 17, 2018 3:22 pm ] |
| Post subject: | Re: Aircraft Spruce MC-4 nose cowl? |
I believe Bernie has the nosebowl you ask about
|
|
| Author: | Cook11 [ Thu Aug 23, 2018 11:50 am ] |
| Post subject: | Re: Aircraft Spruce MC-4 nose cowl? |
Thanks for the info guys! |
|
| Author: | thorpdrvr [ Fri Aug 24, 2018 2:45 pm ] | ||||
| Post subject: | Re: Aircraft Spruce MC-4 nose cowl? | ||||
I have the Aircraft Spruce MC-4 nose bowl with the MC-5 bottom pan. The spinner is a BN-3 from Spruce also. The cowl was slightly larger than spinner trailing edge, so did some work on cowl to make it match spinner. The cooling air inlets were closed up a bit and the bottom pan was modified with the exhaust outlets and ram air intake.
|
|||||
| Author: | Rich Brazell [ Fri Aug 24, 2018 5:17 pm ] |
| Post subject: | Re: Aircraft Spruce MC-4 nose cowl? |
One of the nicest T-18's I've seen ! RB 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|