Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
Cracked Acrylic http://t18.net/thorpforum/viewtopic.php?f=6&t=6517 |
Page 2 of 2 |
Author: | flyingfool [ Thu Jun 02, 2016 1:55 pm ] |
Post subject: | Wing strut plate & bolt tolerance/fit |
Since I already have a wing that is built. that I am in the process of repairing. And the strut attach plate is already built, drilled etc. All I can do is measure the dimension of the existing holes. But even t his is not 100% sure that they are perfectly round. So I'm wondering if I were to ream out the holes so I KNOW they are round and the exact diameter. If it is ever so slightly oversized, will I be able to find a bold diameter to best fit this now potentially SLIGHTLY oversized hole and achieve the proper "tight" fit? I guess what I'm asking is do they make bolts that are oversized bythousandsth of an inch so that I can simply buy off the shelf oversized bolts. Rather than having to potentially construct new strut plates? |
Author: | dickwolff [ Thu Jun 02, 2016 2:07 pm ] |
Post subject: | Re: Cracked Acrylic |
Make a new plate. |
Author: | Rich Brazell [ Thu Jun 02, 2016 2:15 pm ] |
Post subject: | Re: Cracked Acrylic |
Genuine Aircraft Hardware Co. http://www.gen-aircraft-hardware.com has the oversize bolts . BOOM ! RB |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |