| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Canopy / Windshield seal needed http://t18.net/thorpforum/viewtopic.php?f=6&t=8792 |
Page 1 of 1 |
| Author: | peterjaypriest [ Fri Sep 01, 2023 11:01 am ] |
| Post subject: | Canopy / Windshield seal needed |
I'm replacing the windshield on my T18, and need to replace the seal as well. The numbers on that seal are difficult to read- but it looks like F4237 MIL-S-6855B 2(40) 2440A545 I've searched a bit, but haven't found anything that matches this stuff. Any ideas for this or something similar that would work? Thanks! |
|
| Author: | James Grahn [ Fri Sep 01, 2023 5:44 pm ] |
| Post subject: | Re: Canopy / Windshield seal needed |
You can use RTV, or a rubber strip. Cubes |
|
| Author: | peterjaypriest [ Sat Sep 02, 2023 9:53 am ] |
| Post subject: | Re: Canopy / Windshield seal needed |
Okay, This is for the windshield / canopy bow. I've ordered some generic P seal that might work. I'll find out... |
|
| Author: | James Grahn [ Sat Sep 02, 2023 10:30 am ] |
| Post subject: | Re: Canopy / Windshield seal needed |
Oh. Ok I have some too. Cubes |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|