Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Dec 22, 2024 9:55 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
Fraser MacPhee
 Post subject: Brakes
PostPosted: Wed Jul 24, 2013 10:12 am 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 8:57 am
Posts: 722
Images: 19
Location: USA
So.....I have a brake caliper that has a little corrosion in it - puck is fine - honed the caliper a few times and new O-ring....but has finally become a source of irritation - OSH prep sys check yesterday eve revealed leaky puck. Sacrebleu!!....figured I might have to overnight a caliper from Spruce. Noticed FBO was open and so I scooted over there to talk to Huy Bui - the local mech and friend. It was 7:30ish. I lament my corroded caliper and he says all he has are 6X6 for the flight school cessnas. He then looks at me and says "Hey, what size O-ring yoo got on puck?"....I stare.....He frowns and says "Muckwad!!!...you got automotive O-ring heywhat?"......I raise an eybrow....He says...."Yoo dum mudderfudder!!!!....I toll yoo hundred time never yooz autocrap in brake or engine".....yoo go remove caliper right now - yoo got 10 minute I kick yorass!!!" (Huy is 5 foot 2 and a buck 20). 8 minutes and 30 seconds later, Huy looked at my caliper and said..."caliper fine, you brain corroded"....he put a new AVIATION O-ring on it and a $1.36 and a half hour later I had working brakes.

I won't do that again. Some things need to stay aviation.

_________________
Fraser MacPhee
N926WM
Serial #279-1
Angel Fire, NM (KAXX)


Top
 Profile Personal album  
 
Rich Brazell
 Post subject: Re: Brakes
PostPosted: Wed Jul 24, 2013 7:14 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
Spend a dollar to save a penny ! I was always told , "Right Tool for the Job !" Think how much labor you would have saved with the correct O-ring Hop Sing ! BOOM !

RB O0 One from column A , rice with egg roll !


Top
 Profile Personal album  
 
Lou
 Post subject: Re: Brakes
PostPosted: Wed Jul 24, 2013 9:15 pm 
Sr. Member
Sr. Member
User avatar

Joined: Sun Feb 12, 2012 4:04 pm
Posts: 375
Images: 3
Location: San Bernadino, CA
So,… What, exactly is the difference between the two?

Fraser, you’re not in the boat alone. I’m having trouble with both mags. Doing the swap tomorrow.
And gear up Friday morning as soon as it’s light enough to see the end of the runway.


Lou

_________________
http://www.dixiefriedfabrication.com/


Top
 Profile Personal album  
 
Rich Brazell
 Post subject: Re: Brakes
PostPosted: Wed Jul 24, 2013 11:12 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
5606 hydraulic fluid would be my guess ? MILSPEC O-Rings

RB O0 BOOM FLUID, BOOM !


Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Brakes
PostPosted: Thu Jul 25, 2013 6:06 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
I have BS Harbor Freight O rings on my bird. Been there for years. No problems
Cubes


Top
 Profile Personal album  
 
Rich Brazell
 Post subject: Re: Brakes
PostPosted: Thu Jul 25, 2013 10:25 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
Maybe you have Hop Sing caliper from BS Harbor Freight ? ??? Probably US Military get same BS O Rings for US fighter jets ? No ? :P

Melandlong


Top
 Profile Personal album  
 
jrevens
 Post subject: Re: Brakes
PostPosted: Thu Jul 25, 2013 11:51 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
There is a difference between the glycol-based brake fluid traditionally used in cars & the mineral-based fluid used in aircraft. I'm not talking about the newer synthetic fluids... a whole 'nother conversation. That being said, there are many different materials used for o-rings. The common Buna-N (nitrile) is usually used on aircraft, & supposedly isn't good for use with automotive fluids. Autos usually use EPDM rubber o-rings, which should be compatible with either type of fluid, but maybe there's a different amount of swelling when used with mineral-based fluid? I don't know.

_________________
John Evens
Arvada, Colorado

T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

[ Time : 0.095s | 12 Queries | GZIP : On ]