Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Mar 28, 2024 5:41 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
SAT18
PostPosted: Mon Sep 02, 2019 7:28 am 
Newbie
Newbie

Joined: Thu Apr 12, 2018 12:20 pm
Posts: 4
Hi Guys,

I want to rebuild the landing gear on my T18, with a Ron Zimmerman (Wittman) style gear. I have two RV6 gear legs, which i would like to use (and appear to be the correct angle and length)

Anyone have either the drawings from Mr Zimmerman, a picture of the A - frame, or perhaps a picture/drawing of the newer 3 piece bolted a-frames (ala S18)?


Top
 Profile  
 
david read
PostPosted: Mon Sep 02, 2019 9:26 am 
Sr. Member
Sr. Member

Joined: Tue Oct 20, 2009 9:21 pm
Posts: 225
Location: USA
I have a new complete gear that style here in southeast Illinois that I would part with.


Top
 Profile  
 
david read
PostPosted: Mon Sep 02, 2019 9:43 am 
Sr. Member
Sr. Member

Joined: Tue Oct 20, 2009 9:21 pm
Posts: 225
Location: USA
I just sent you a PM with a picture


Top
 Profile  
 
SAT18
PostPosted: Mon Sep 02, 2019 9:56 am 
Newbie
Newbie

Joined: Thu Apr 12, 2018 12:20 pm
Posts: 4
Thanks for the picture, still looking for a drawing however.


Top
 Profile  
 
leewwalton
PostPosted: Mon Sep 02, 2019 10:46 am 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1705
Images: 107
Location: Houston, TX
I don’t think you’re going to find a “drawing” of the 3 piece gear. It was certainly not a Thorp or Sunderland design. The closest LS proposed was cutting the gear vertically. The gear Dave just sent you the picture of is about the best you’re going to get to visualizing a Wittman gear on a Thorp.

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD


Top
 Profile Personal album  
 
fytrplt
PostPosted: Mon Sep 02, 2019 11:51 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1140
Images: 2
Location: Lakeland, Florida, USA
The only Wittman geared Thorp I know of waddled when it taxied.

_________________
Bob Highley
N711SH
SN 835
KLAL


Top
 Profile Personal album  
 
david read
PostPosted: Mon Sep 02, 2019 7:14 pm 
Sr. Member
Sr. Member

Joined: Tue Oct 20, 2009 9:21 pm
Posts: 225
Location: USA
If someone wants to try it I would take $500 for this one or trade it for a conventional gear


Top
 Profile  
 
stevehawley
PostPosted: Tue Sep 03, 2019 4:03 pm 
Jr. Member
Jr. Member

Joined: Tue Mar 02, 2010 2:30 pm
Posts: 86
Location: USA
Several years ago I switched from a wood prop to metal one and have a standard prop extension for a wood prop I will sell. It is for a Lycoming O-360. I bought it from John Thorp when I was using his templates in his shop back in 1974 or thereabouts. I will take $300.00 plus shipping. If interested e-mail me at stevehawl@windstream.net and I will provide pictures.
Steve


Top
 Profile  
 
T18Tprop
PostPosted: Sun Oct 11, 2020 6:47 am 
Newbie
Newbie

Joined: Sun Oct 25, 2009 11:27 am
Posts: 5
Location: Sweden
A bit late on this topic. I have the bird build by Ron Zimmerman, (N118).
Initially I believed the landing gear was designed by Ken Broke. The guy I bought the plane from, told me that this landing gear is much better that the original designed by J. Thorp, since it will not get cracks as the original one or as the RVs, which is true so far. That is it a tapered steel design that slips into a receiving end and located with one bolt.
With the plane I get all the building documentation, but as far I remember no extra drafts for landing gear. I will check and get back if any drawings found for the l.g.
Let me know if you are still interested in the pictures. The plane is 60 miles from where I'm living. It is a 3 parts gear.
@ Lee, yes I get a bit of shimming on the concrete runways, after landing, that depends on speed and on the tire pressure. By accelerating or decelerating slightly the shimming disappear. This shimming it is much more common for the RV6 I've heard. On grass strips there is no problem with shimming.
Just curios how Wittmann gears get on Thorps ?
/Valentin


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.193s | 14 Queries | GZIP : On ]