Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
WHEEL PANT BRACKET http://t18.net/thorpforum/viewtopic.php?f=7&t=8717 |
Page 1 of 1 |
Author: | rjaeger [ Thu Jun 23, 2022 12:27 pm ] |
Post subject: | WHEEL PANT BRACKET |
Getting ready to attach the wheel pants and looking for a template or pattern having the four axle bolt holes and brake cutout. Anyone have such? Thanks |
Author: | Ryan Allen [ Thu Jun 23, 2022 4:51 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
I would like to see that as well if anyone has one. |
Author: | Rich Brazell [ Thu Jun 23, 2022 7:15 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
I checked Cubes web site and he lists a wheel pant bracket as part # 990-3 . Not sure what it looks like ? It's been almost 12 years since I built up my wheel pants and I don't remember a P/N 990-3 ? I believe I made mine from trial and error or it may have been from an article in one of the OLD NEWS LETTERS ? If anyone knows how to search the old NL's it may be in there ? Happy hunting ! RB ![]() |
Author: | James Grahn [ Thu Jun 23, 2022 10:27 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
I do sell them. If you would rather try to make your own, I’ll take a picture of it for you. Cubes |
Author: | Ryan Allen [ Fri Jun 24, 2022 6:33 am ] |
Post subject: | Re: WHEEL PANT BRACKET |
and if i read it correctly on the website, each one is only $12! |
Author: | James Grahn [ Sat Jun 25, 2022 10:16 am ] |
Post subject: | Re: WHEEL PANT BRACKET |
Well, like everything in this world, they have gone up to $21.95. They are laser cut with axle mount holes drilled. Cubes |
Author: | Hagle347 [ Sat Jun 25, 2022 11:32 am ] |
Post subject: | Re: WHEEL PANT BRACKET |
That's still a bargain - was a pain to even modify the ones on TH |
Author: | Rich Brazell [ Sat Jun 25, 2022 3:28 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
I do remember it took me hours of cut and fit for the bracket , PLUS all the time to cut and fit the wheel pant ! Well worth the money to have one laser cut and drilled ! After I had one honed to my personal specs I used it as a pattern for the other wheel . OH MY ! RB ![]() |
Author: | ljkrume [ Sat Jun 25, 2022 3:52 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
I’ll second that. It will probably take a lot of trial and error to get brackets and wheel pants to fit. You can buy a pair of brackets to get you started, but don’t be surprised if it takes some time to get it right. This is one of those place they all seem to be custom fit. Go into it with a little patience. Les K |
Author: | rjaeger [ Sun Jun 26, 2022 11:17 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
Well, I guess I should have thought of Cubes having that part before I started but I think I;m pretty close to the final plate. I'm even doing what Lee stated about welding a nutplate bracket on the axle nut to secure the outboard part of the wheel pant. Cubes, and others, What thickness of the inner plate do you sell or recommend? Thanks |
Author: | James Grahn [ Thu Jun 30, 2022 10:31 am ] |
Post subject: | Re: WHEEL PANT BRACKET |
We use .090. Cubes |
Author: | rjaeger [ Mon Jul 04, 2022 3:35 pm ] |
Post subject: | Re: WHEEL PANT BRACKET |
Thanks Bruce and Cubes. |
Author: | Savalas [ Tue Aug 02, 2022 1:10 am ] |
Post subject: | Re: WHEEL PANT BRACKET |
What is Cubes website? |
Author: | James Grahn [ Tue Aug 02, 2022 7:09 am ] |
Post subject: | Re: WHEEL PANT BRACKET |
Thorp central.com. You can reach it from the opening page of this site. Cubes |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |