BTW that polishing includes removing the tooling marks on the spinner . I think that is a GREAT deal for $45.00 ! It must have been my "Secret" hand shake to keep the price low ?
RB
| Thorp Air Command - T18.net http://t18.net/thorpforum/ |
|
| Spinner Polishing http://t18.net/thorpforum/viewtopic.php?f=8&t=7395 |
Page 1 of 1 |
| Author: | Rich Brazell [ Thu Sep 19, 2013 3:26 pm ] |
| Post subject: | Spinner Polishing |
I just talked with Oscar at Polishing Prozs here in San Diego and he will still polish ours spinners . The old price of $40.00 has gone up to $45.00 . This price is only for the T-18 group and only for T-18 spinners ! His regular price to mirror polish a spinner is $70-75.00 . His address has changed so do not use the one in the builder resources section of the Forum . If you want to have Oscar polish your spinner (no dent removal in the $45.00 price) , here is what you do . Pack your spinner in an appropriate box with plenty of bubble wrap , etc. In the box put all your appropriate info. Name , address , phone , e-mail and state you are part of the T-18 pilot group and know me . A pre-paid return shipping label (UPS/FedEx) needs to be in the box also so Oscar can send it back . Enclose a check or money order for the $45.00 made out to Polishing Prozs . If you want to pay by credit card include that in the note with your personal info . and have Oscar call you when the spinner is ready and he will take the credit card info . I don't know what his turn around time is , but he had my new spinner ready in a few days . Address...Polishing Prozs 1987 Friendship Dr. Suite C El Cajon , CA 92020 Attention: OSCAR Oscar Preciado...Owner Polishing Prozs 619-562-9108 FAX 619-562-9109 Mon-Fri 0800-1630 sales@polishingproz.com http://www.PolishingProz.com RB |
|
| Author: | leewwalton [ Thu Sep 19, 2013 7:17 pm ] |
| Post subject: | Re: Spinner Polishing |
On the way RB! Thanks! |
|
| Author: | Rich Brazell [ Thu Sep 19, 2013 8:03 pm ] |
| Post subject: | Re: Spinner Polishing |
BTW that polishing includes removing the tooling marks on the spinner . I think that is a GREAT deal for $45.00 ! It must have been my "Secret" hand shake to keep the price low ? RB
|
|
| Author: | leewwalton [ Thu Sep 19, 2013 8:06 pm ] |
| Post subject: | Re: Spinner Polishing |
Worth every penny! |
|
| Author: | Rich Brazell [ Fri Sep 20, 2013 3:22 pm ] |
| Post subject: | Re: Spinner Polishing |
Lee how can I update the new info for Polishing Prozs on the vendors/builders page ? I don't see an edit button ? RB |
|
| Author: | leewwalton [ Fri Sep 20, 2013 3:47 pm ] |
| Post subject: | Re: Spinner Polishing |
I see an edit button but it may be a permissions thing. I updated it for you RB. |
|
| Author: | Rich Brazell [ Fri Sep 20, 2013 4:19 pm ] |
| Post subject: | Re: Spinner Polishing |
Thanks Lee . RB |
|
| Author: | Rich Brazell [ Fri Sep 20, 2013 4:54 pm ] |
| Post subject: | Re: Spinner Polishing |
Lee: Just check the polishing site . The address needs an update as well as the e-mail info. New address... 1987 Friendship Dr. Suite C El Cajon, CA 92020 sales@polishingproz.com www.PolishingProz.com Phone and FAX are OK . |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|