Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Dec 22, 2024 7:18 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
Ryan Allen
PostPosted: Sun Jun 08, 2014 8:03 am 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1123
Images: 0
Location: Louisiana
I have just put in a new panel, and I have flown a few hours with it now. In the last couple of hours, my com radio transmit function started acting up on me. I was very disappointed since I just worked so hard to get that panel/wiring installed. Well, I flew a few more times with my transmit problems, sometimes I was relegated to using my handheld. I tried a few things between flights, and I checked the mic jacks, but I couldn't figure out my intermittent tx issue. On my last flight, the tx function went completely out.

I dove in yesterday and started pulling wires. The problem showed itself pretty quickly. A connection had come loose in the TX line. When I saw it, I realized what had happened. During my installation sessions, I installed the wiring in increments, and tested as I went. I would just barely connect them so I could pull them apart more easily should that wire not pass its test. If it passed its test, I would fully seat the connectors and continue to the next wire.

Well, I forgot I had not secured a connection properly, had moved on to the next wire and buttoned everything up and went flying. These connections vibrated apart during the flights. It was a lessoned learned. That was a poor installation method. I like the "test in increments" method, but I needed a better way to implement that idea.


Top
 Profile Personal album  
 
James Grahn
PostPosted: Sun Jun 08, 2014 8:42 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
Good lesson learned. Don't forget the new weight and balance.
Cubes


Top
 Profile Personal album  
 
Ryan Allen
PostPosted: Sun Jun 08, 2014 9:05 am 
Hero Member
Hero Member
User avatar

Joined: Wed Oct 21, 2009 6:10 pm
Posts: 1123
Images: 0
Location: Louisiana
I did forget that. thanks. good timing too. The CI is due at the end of this month, so that will be a great time for the W&B.


Top
 Profile Personal album  
 
Rich Brazell
PostPosted: Sun Jun 08, 2014 9:02 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
The airline builders have the same problem ! ???

RB O0


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

[ Time : 0.112s | 13 Queries | GZIP : On ]