Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Dec 22, 2024 10:12 am

View unanswered posts | View active topics


Board index » Thorp T-18 » Wing

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 
  Print view Previous topic | Next topic 
Author Message
Hoov330
 Post subject: Aileron Travel
PostPosted: Mon Feb 21, 2011 6:23 pm 
Newbie
Newbie

Joined: Wed Jun 09, 2010 8:02 pm
Posts: 28
Location: USA
Can anyone tell me what the Aileron travel is supposed to be?

Thanks

_________________
J. Hoover
N330JH
Yelm, Wa


Last edited by Anonymous on Mon Feb 21, 2011 6:23 pm, edited 1 time in total.

Top
 Profile  
 
Rich Brazell
 Post subject: Aileron Travel
PostPosted: Mon Feb 21, 2011 7:53 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
Do uz have a set of plans ? If not go to the Thorplist archives, hit search and type in aileron travel. Bada Big, Bada Boom !

RB


Last edited by admin on Mon Feb 21, 2011 7:53 pm, edited 1 time in total.

Top
 Profile Personal album  
 
leewwalton
 Post subject: Aileron Travel
PostPosted: Mon Feb 21, 2011 10:18 pm 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1715
Images: 107
Location: Houston, TX
Jerry,

Up 35 deg, down 10 deg. (dwg 520).

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD


Last edited by admin on Mon Feb 21, 2011 10:18 pm, edited 1 time in total.

Top
 Profile Personal album  
 
Hoov330
 Post subject: Aileron Travel
PostPosted: Tue Feb 22, 2011 5:24 pm 
Newbie
Newbie

Joined: Wed Jun 09, 2010 8:02 pm
Posts: 28
Location: USA
Thanks Lee, rather than spending 50 mins draggin my plans out of storage I figured Id ask and get a quick reply.

_________________
J. Hoover
N330JH
Yelm, Wa


Last edited by admin on Tue Feb 22, 2011 5:24 pm, edited 1 time in total.

Top
 Profile  
 
PanchoGA
 Post subject: Re: Aileron Travel
PostPosted: Wed Sep 11, 2019 7:52 am 
Newbie
Newbie

Joined: Tue Feb 21, 2017 9:54 pm
Posts: 18
Hi All,
I'm building an S18, and having trouble with aileron travel. The push-pull tube to the aileron hits the bottom of the rear spar, limiting the up deflection. Has anyone else seen this problem? What's a solution?
I tried adding spacers between the bottom of the aileron and mast 311. Now the push-pull tube doesn't hit the rear spar, but the push-pull tube is working with a longer arm, which reduces aileron travel. Not much help there.

Thanks,
Pancho
Top
 Profile  
 
fytrplt
 Post subject: Re: Aileron Travel
PostPosted: Wed Sep 11, 2019 8:40 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1153
Images: 2
Location: Lakeland, Florida, USA
Most of us live with less "up" than the plans call for. Make sure the belcrank is centered before you adjust the aileron push pull tube. The ten degrees down is required. Start from the stick and work outward.

_________________
Bob Highley
N711SH
SN 835
KLAL
Top
 Profile Personal album  
 
PanchoGA
 Post subject: Re: Aileron Travel
PostPosted: Wed Sep 11, 2019 9:38 am 
Newbie
Newbie

Joined: Tue Feb 21, 2017 9:54 pm
Posts: 18
Interesting. Less up travel will reduce aileron authority. No problems from that?

BTW, my memory failed me concerning the aileron mast part number, it should be 331.
Top
 Profile  
 
fytrplt
 Post subject: Re: Aileron Travel
PostPosted: Wed Sep 11, 2019 11:43 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1153
Images: 2
Location: Lakeland, Florida, USA
The down aileron is what creates the additional lift to roll the plane. The up aileron creates drag to counter adverse yaw in my humble opinion.

_________________
Bob Highley
N711SH
SN 835
KLAL
Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: Aileron Travel
PostPosted: Thu Sep 12, 2019 11:21 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
I’ve been rebuilding and condition inspecting these birds for years. I don’t think I’ve ever seen plus 35, minus 10. Make it do the -10 and try to get +25 and even.
Cubes
Top
 Profile Personal album  
 
PanchoGA
 Post subject: Re: Aileron Travel
PostPosted: Fri Sep 13, 2019 7:47 pm 
Newbie
Newbie

Joined: Tue Feb 21, 2017 9:54 pm
Posts: 18
-10 and +25 is what I'm seeing. Thanks for the input.
Top
 Profile  
 
Unclerap
 Post subject: Re: Aileron Travel
PostPosted: Sat Sep 14, 2019 12:03 pm 
Jr. Member
Jr. Member
User avatar

Joined: Mon Mar 19, 2018 4:23 pm
Posts: 62
While on this subject: How many inches of travel stop to stop along the aileron torque tube(s), and also same travel on the elevator tube?

thanks,

Rap

_________________
Base: KALX
N8786
SN 929
Top
 Profile  
 
James Grahn
 Post subject: Re: Aileron Travel
PostPosted: Mon Sep 16, 2019 10:19 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
Not sure why this matters Rap. But as near as I can figure the horizontal push/pull moves 1 5/16 from center to either stop. The aileron travel on the 105 drawing (which is S18 specific), moves 2.5 inches.
The angles are what you should be looking for.
Cubes
Top
 Profile Personal album  
 
Unclerap
 Post subject: Re: Aileron Travel
PostPosted: Tue Sep 17, 2019 7:42 pm 
Jr. Member
Jr. Member
User avatar

Joined: Mon Mar 19, 2018 4:23 pm
Posts: 62
James Grahn wrote:
Not sure why this matters Rap. But as near as I can figure the horizontal push/pull moves 1 5/16 from center to either stop. The aileron travel on the 105 drawing (which is S18 specific), moves 2.5 inches.
The angles are what you should be looking for.
Cubes


The travel distance knowledge is what I need and thanks for the info. AP servo is limited to 2.5" max travel with the standard servo arm. Right on the edge.

Rap

_________________
Base: KALX
N8786
SN 929
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 13 posts ] 

Board index » Thorp T-18 » Wing

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

[ Time : 0.112s | 12 Queries | GZIP : On ]