Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sat Dec 21, 2024 9:01 pm

View unanswered posts | View active topics


Board index » Thorp T-18 » Canopy

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Ptbob484
 Post subject: Canopy - Latch open
PostPosted: Thu Dec 03, 2020 6:28 pm 
Newbie
Newbie

Joined: Thu Oct 10, 2019 7:54 pm
Posts: 37
Hi guys. Anyone know how to make the canopy stay open when one is taxing?
Top
 Profile  
 
Jeff J
 Post subject: Re: Canopy - Latch open
PostPosted: Thu Dec 03, 2020 6:46 pm 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 584
Images: 0
Location: eastern OK
I block it with my arm.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson
Top
 Profile Personal album  
 
TonyNZ
 Post subject: Re: Canopy - Latch open
PostPosted: Thu Dec 03, 2020 10:20 pm 
Full Member
Full Member
User avatar

Joined: Thu Oct 22, 2009 10:25 pm
Posts: 106
Images: 8
Location: New Zealand
Yep so do I.

Tony
ZK-VMS
T18C
Top
 Profile Personal album  
 
fytrplt
 Post subject: Re: Canopy - Latch open
PostPosted: Sat Dec 05, 2020 7:10 am 
Hero Member
Hero Member
User avatar

Joined: Tue Oct 20, 2009 8:07 pm
Posts: 1153
Images: 2
Location: Lakeland, Florida, USA
Copilot's duty during run up.

_________________
Bob Highley
N711SH
SN 835
KLAL
Top
 Profile Personal album  
 
Jeff J
 Post subject: Re: Canopy - Latch open
PostPosted: Sat Dec 05, 2020 10:10 am 
Sr. Member
Sr. Member

Joined: Wed Aug 31, 2016 8:18 am
Posts: 584
Images: 0
Location: eastern OK
I flew with it unlatched one day. I was by myself and the canopy closed at the beginning of the run up. By the time I finished the run up I had forgotten about it. No harm done but now I latch it shut before I do the run up.

_________________
Thorp T18
O-320-B3B (160 HP)
68x74 Sterba Propeller

"The joke in aviation is, 'If you want to make a million, you'd better start with £10m.' " -Bruce Dickinson
Top
 Profile Personal album  
 
Tony Ginn
 Post subject: Re: Canopy - Latch open
PostPosted: Sat Dec 05, 2020 3:21 pm 
Jr. Member
Jr. Member

Joined: Sat Sep 25, 2010 9:10 pm
Posts: 84
Location: USA
I bent up a stainless steel tab that catches the roller bearings in their aft-most position. Works great.
Top
 Profile  
 
jrevens
 Post subject: Re: Canopy - Latch open
PostPosted: Sun Dec 06, 2020 12:16 am 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
"I bent up a stainless steel tab that catches the roller bearings in their aft-most position. Works great."

I think I'm the one who came up with that idea quite a few years ago, Tony... works pretty well, especially if you don't have a lot of sidewall upholstery in that area. I know I sent some stainless material to your brother for that purpose back when.


Attachments:
CanopyHold2.jpg
CanopyHold2.jpg [ 253.19 KiB | Viewed 9333 times ]
CanopyHold1.jpg
CanopyHold1.jpg [ 247.14 KiB | Viewed 9333 times ]

_________________
John Evens
Arvada, Colorado
T-18 N71JE (sold)
Kitfox 7 SS N27JE
Top
 Profile  
 
ScottECG
 Post subject: Re: Canopy - Latch open
PostPosted: Sun Dec 06, 2020 5:46 am 
Newbie
Newbie

Joined: Tue Jun 16, 2020 6:06 pm
Posts: 31
I can confirm that 149RH has an identical tab John. Tony, Did you make it for Scott?

_________________
Scott Hinton
N149RH
KECG
Elizabeth City, NC
Top
 Profile  
 
Rich Brazell
 Post subject: Re: Canopy - Latch open
PostPosted: Sun Dec 06, 2020 2:41 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
Attachment:
Canopy Latch 003.JPG
Canopy Latch 003.JPG [ 2.03 MiB | Viewed 9305 times ]
Attachment:
Canopy Latch 004.JPG
Canopy Latch 004.JPG [ 1.05 MiB | Viewed 9305 times ]
Attachment:
Canopy Latch 001.JPG
Canopy Latch 001.JPG [ 1.37 MiB | Viewed 9305 times ]
Made mine from scraps in the where did I put that drawer ? ::) Nothing more than a small piece of angle , a piece of spring steel and a nylon latch made from some left over nylon strip . I also used miniature screws and nuts . :P To keep the canopy open I push with one hand to the full open position and then push foward on the canopy to seat the frame in the nylon latch . To close push the canopy full open with one hand hold open the nylon latch portion and then push the canopy frame past the nylon latch . :o BADA BING , BADA BOOM ![b][/b]

RB O0
Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Thorp T-18 » Canopy

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 6 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.194s | 13 Queries | GZIP : On ]