Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Dec 22, 2024 4:02 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 15 posts ] 
Author Message
OleBoy
PostPosted: Tue May 31, 2011 12:06 am 
Newbie
Newbie

Joined: Fri May 27, 2011 8:46 pm
Posts: 8
Location: USA
Hello everyone,

I am a virtual pilot. My name is Don. Forum name, OleBoy. That's the name I use on the virtual flight forums also. I'll explain a little about myself, and why I'm here.

Not too long ago, a friend of mine released a Thorp T-18 model, that he has been working on for quite some time. He has been around a Thorp T-18 for many years as his father enjoyed building experimental aircraft to fly, and explore the skies. As years passed by, by friend Robert found interest in virtual flight. I don't know the whole story behind the fascination, but Robert decided that he wanted to create a Thorp T-18 "Tiger" for use in Microsoft Flight Simulator X.

While having got to know Robert (of whom I met on a flight simulator forum), he shared with me his model he had been designing. It appeared to me to be a very well done model. Not long after he shared the model with me, he asked me if I would be interested in doing a few paint schemes as a test. Being an artist in Adobe Photoshop I agreed. I couldn't resist a new challenge. That's when I started searching all over the internet for paint schemes that caught my eye. I found many schemes I wanted to do. This is how I found thorp18.com.

My reason for being here is that I thought some here might enjoy seeing the model my friend Robert has created for virtual flight (considering it's a Thorp T-18), and the paints I've done for it. I hope you enjoy them.


Please note that you can view the pictures I've posted below in High Resolution, by right-clicking with your mouse, then by selecting "View Image"

ZK-KID
Image
Image

ZK-EDF (old)
Image
Image

ZK-EDF (new)
Image

N6CM
Image
Image

N9675Z
Image
Image


[:)]

For those interested in seeing more detailed pictures of the cockpit and everything else, or those interested in virtual flight, more can be read, and viewed at this link (you may have to register to see the photos) http://www.sim-outhouse.com/sohforums/s ... n-uploaded!

By the way, I'm always looking for unique schemes to put on our virtual Thorp T-18.

_________________
Virtual Painter of the Thorp T-18


Last edited by OleBoy on Tue May 31, 2011 12:06 am, edited 1 time in total.

Top
 Profile  
 
dickwolff
PostPosted: Tue May 31, 2011 5:13 am 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 500
Images: 6
Location: Canada
Don, where can I get the actual airplane for the simulator?

_________________
_________
In theory, theory and practice are the same. In practice, they are not.


Last edited by admin on Tue May 31, 2011 5:13 am, edited 1 time in total.

Top
 Profile Personal album  
 
OleBoy
PostPosted: Tue May 31, 2011 6:57 am 
Newbie
Newbie

Joined: Fri May 27, 2011 8:46 pm
Posts: 8
Location: USA
If you read the thread at sim-outhouse.com, that tells all.

Note: This model is of no use to anyone unless they have Microsoft Flight Simulator X installed. It is/was made specifically for that simulation program only. Also, the virtual flight community is very fortunate this plane was released freely. Both visually and flight characteristics, the plane is very real in every aspect.

Here's a link to my domain http://www.oleboys-paintshop.yolasite.c ... p-t-18.php

By the way, if anyone can lead me to better photos of this registration (higher resolution preferred) I would like to do this scheme also. http://www.airliners.net/photo/Thorp-T- ... 7606905246

_________________
Virtual Painter of the Thorp T-18


Last edited by OleBoy on Tue May 31, 2011 6:57 am, edited 1 time in total.

Top
 Profile  
 
Tom
PostPosted: Tue May 31, 2011 9:14 am 
Newbie
Newbie

Joined: Thu Jan 07, 2010 8:00 pm
Posts: 5
Location: USA
Interesting paint jobs.

Having known Mr. Thorp quite well for a number of years, I can say that he didn't think too much of paint on his airplanes. He figured paint was an acceptable evil to fight corrosion but added weight - the enemy. He wasn't very big on upholstery either! His T-18 was paintless, as many of you know, and the upholstery was spartan. The paint on his T211 was plain and muted without frills, scrolls or other fancy attention getters and the interior was basic and minimalist canvas as well. I'm sure his SkySkooter would have been polished aluminum as well had the corrugated wings lent themselves to such finish.
Mr. Thorp was the most no nonsense guy I ever had the pleasure to know, he was all about efficiency in his airplanes.


Last edited by admin on Tue May 31, 2011 9:14 am, edited 1 time in total.

Top
 Profile  
 
OleBoy
PostPosted: Wed Jun 01, 2011 8:52 am 
Newbie
Newbie

Joined: Fri May 27, 2011 8:46 pm
Posts: 8
Location: USA
To each their own as they say.

Soon, with the help of the EAA Air Venture Museum, I will be doing the paint scheme of the Thorp T-18, owned by Don Taylor, registration # N455DT, in all it's glory from the RTW flight.

_________________
Virtual Painter of the Thorp T-18


Last edited by admin on Wed Jun 01, 2011 8:52 am, edited 1 time in total.

Top
 Profile  
 
dickwolff
PostPosted: Wed Jun 01, 2011 12:00 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 500
Images: 6
Location: Canada
Interesting technology, Don Oleboy. How difficult is it to "paint" virtual airplanes? This could be a great way to test ideas before doing the real thing.

From what I can tell, Thorps seem to be a particularly difficult airplane on which to create a pleasing paint design. To my eye you did a fantastic job in thumbnailhk.jpg.

DW

_________________
_________
In theory, theory and practice are the same. In practice, they are not.


Last edited by admin on Wed Jun 01, 2011 12:00 pm, edited 1 time in total.

Top
 Profile Personal album  
 
Rich Brazell
PostPosted: Wed Jun 01, 2011 1:01 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
A virtual paint shop would be a great idea, (now that I've painted mine !) I am sure this young man has some "copy rights" to the process, but what a time saver it would be.

RB


Last edited by admin on Wed Jun 01, 2011 1:01 pm, edited 1 time in total.

Top
 Profile Personal album  
 
Fraser MacPhee
PostPosted: Wed Jun 01, 2011 1:27 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 8:57 am
Posts: 722
Images: 19
Location: USA
Jeebus Dick.....pleasing to the eye is what your plane is now - a few wrinkles close up perhaps, but a real pin up girl of yellow and blue - don't be looking at paint porn yet.....get it flying.

_________________
Fraser MacPhee
N926WM
Serial #279-1
Angel Fire, NM (KAXX)


Last edited by admin on Wed Jun 01, 2011 1:27 pm, edited 1 time in total.

Top
 Profile Personal album  
 
dickwolff
PostPosted: Wed Jun 01, 2011 3:20 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 500
Images: 6
Location: Canada
Agreed, Fras... I'm not unhappy with the paint scheme on MLM. It's a 10 ft. paint job, but it does have real nice lines. I especially like "Don't Hit Me Yellow." Unfortunately Imron has discontinued it.

_________________
_________
In theory, theory and practice are the same. In practice, they are not.


Last edited by admin on Wed Jun 01, 2011 3:20 pm, edited 1 time in total.

Top
 Profile Personal album  
 
OleBoy
PostPosted: Fri Jun 03, 2011 12:25 am 
Newbie
Newbie

Joined: Fri May 27, 2011 8:46 pm
Posts: 8
Location: USA
The question comes up of how difficult virtual aircraft are to paint. Well, I can't really give you an definitive answer. It takes several programs that deal with graphic arts. I use Adobe Photoshop for most of my paintwork. A program I have been using for many years. And a foray of other programs I use in between before you see what you see in the photos I've shown. And to add, the pictures do the actual look of the finished paint scheme no justice at all because you can't see the visual depth in 2D. You're only seeing one angle. Some of my paint schemes take weeks to perfect. And have a depth that just grabs the eye and makes you want to look at it more and more. I can get extremely detailed if I wanted to put in the time, but most people who see my work never say anything about it. I personally see my work as a form of art. Most in the virtual flight communities never say anything much about all of them I do. And I'm just scratching the surface where I can go with other paint schemes.

This is the next one I have plans to re-create. I've made contact with the folks at the EAA Airventure Museum. They're working on gathering/taking all the photos I need so I can do it the best it can possibly be done. http://www.airport-data.com/aircraft/photo/299907L.html It will be interesting to see it come together. I'm looking forward to doing it.

I've added a note to my pictures I posted above for those of you who aren't aware of this particular feature when viewing photos on a website. Please note that you can view the pictures I've posted previously in High Resolution, by right-clicking with your mouse, then by selecting "View Image"

_________________
Virtual Painter of the Thorp T-18


Last edited by OleBoy on Fri Jun 03, 2011 12:25 am, edited 1 time in total.

Top
 Profile  
 
stug
PostPosted: Fri Jun 03, 2011 1:32 am 
Sr. Member
Sr. Member

Joined: Tue Aug 24, 2010 2:20 am
Posts: 158
Images: 0
Location: Australia
Don

I'm curious about how your paint schemes might be scaled up to full scale.
For instance could you scale up a paint scheme from your virtual models to make them suitable for sign writing printing at full size?
The way I figure it rather than paint a complex design you could simply print onto vinyl stickers.
It might be a good cost effective way of turning a basic paint job into something much more interesting.
Nice designs by the way.
Stuart

_________________
Stug


Last edited by admin on Fri Jun 03, 2011 1:32 am, edited 1 time in total.

Top
 Profile Personal album  
 
OleBoy
PostPosted: Fri Jun 03, 2011 4:22 am 
Newbie
Newbie

Joined: Fri May 27, 2011 8:46 pm
Posts: 8
Location: USA
Hello Stuart,

What you mention can be done I would think fairly easily. How long it would last, hard saying considering the use and intended air speeds, fuel residue, bugs, and who knows whatever elements mother nature tosses at the material. Aside from other modifications different builders have incorporated into their own personal likings, I think anything could be worked with. longevity and the methods of installation would be crucial. I know paint is not cheap. Vinyl would be in the same lines for any given quality.

I know there are all sorts of different styles of engine cowls, wheel pants etc, but I honestly don't see a problem. I have a bit of vinyl graphics experience, design, layout, etc.

_________________
Virtual Painter of the Thorp T-18


Last edited by OleBoy on Fri Jun 03, 2011 4:22 am, edited 1 time in total.

Top
 Profile  
 
OleBoy
PostPosted: Sun Jun 05, 2011 11:51 pm 
Newbie
Newbie

Joined: Fri May 27, 2011 8:46 pm
Posts: 8
Location: USA
Here is another I've just completed. Roughly four days time spent on the checkered nose alone. It gives you the idea though.

For the best view, right-click the image, then select view image
Image
Image
Image

_________________
Virtual Painter of the Thorp T-18


Last edited by OleBoy on Sun Jun 05, 2011 11:51 pm, edited 1 time in total.

Top
 Profile  
 
Brent Schultz
PostPosted: Thu Jun 09, 2011 10:24 pm 
Full Member
Full Member

Joined: Fri Oct 23, 2009 12:23 am
Posts: 100
Images: 19
Location: USA
I have owned and operated N6CM for several years with my brother. It is the finest and most fun airplane I have ever flown. Just a wonderful bird that puts a giant smile on your face every time you fly it.


Last edited by admin on Thu Jun 09, 2011 10:24 pm, edited 1 time in total.

Top
 Profile Personal album  
 
Scott Stine
PostPosted: Fri Jun 10, 2011 8:44 am 
Jr. Member
Jr. Member

Joined: Wed Oct 21, 2009 9:57 pm
Posts: 54
Images: 5
Location: USA
Some really interesting application of technology. Would be great to try out some paint schemes prior to painting. You've done some nice work. Someone near OleBoy able to give him a ride in the real thing....might be just the ticket to get out of the virtual world and into the real.

SS

_________________
Scott Stine
Vincennes, IN
812-881-7923
Arrow 545WA


Last edited by admin on Fri Jun 10, 2011 8:44 am, edited 1 time in total.

Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.118s | 12 Queries | GZIP : On ]