Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Dec 22, 2024 5:22 am

View unanswered posts | View active topics


Board index » Classifieds » Parts

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 2
  [ 17 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
dickwolff
 Post subject: Prop and Spinner wanted
PostPosted: Tue Dec 13, 2011 9:40 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 500
Images: 6
Location: Canada
Looking for a good prop for an O360, ideally with a Thorp-sized spinner.

Dick Wolff
edwolff @ brucetelecom dot com
Top
 Profile Personal album  
 
Rich Brazell
PostPosted: Tue Dec 13, 2011 11:27 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
O0 AD prop. BN-3 spinner kit from Spruce...made for the Lycoming and fits the cowling, (you have to do the cut outs). If you need a crush plate and extension...Saber products. He even has the correct prop bolts. This is the package I used and have been very happy. Assuming you are looking for a wood prop ? ::) The spinner has tooling marks on it and will need polishing. Spruce can do the polishing for a price.

RB
Top
 Profile Personal album  
 
chuck
PostPosted: Tue Dec 27, 2011 5:43 pm 
Sr. Member
Sr. Member
User avatar

Joined: Wed Oct 21, 2009 10:53 am
Posts: 169
Images: 19
Location: USA
Dick,

I have a Sensenich 70/77 1/2 bolts with spinner and bulkheads, has about 100 hours on it. I don't know if would fit an 0-360 it came off of my 0-320.

Chuck
Top
 Profile Personal album  
 
dan
PostPosted: Fri Dec 30, 2011 9:57 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Dick, check with Dean Cuke on that prop for the 360, I believe he has one in his Garage. Dan
Top
 Profile  
 
dan
PostPosted: Tue Jan 03, 2012 9:30 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Hi Dick, I gave Dean your email,he will mail you in regards to the prop."....Dan
Top
 Profile  
 
Bill Williams
PostPosted: Wed Jan 04, 2012 7:27 am 
320's and 360 Lyc's have different prop bolts unless someone has changed the flange spools . The 320 has 7/16" bolts and the 360 has 1/2" bolts and will not interchange.
Top
  
 
davem
PostPosted: Wed Jan 04, 2012 10:37 am 
Jr. Member
Jr. Member
User avatar

Joined: Thu Oct 22, 2009 9:27 am
Posts: 56
Location: USA
Depending on the model, some O-320s have 3/8" bolts lugs--the OD of the lug is otherwise the same as the 7/16" ones. I had one of each up until a couple of months ago.
Dave M
Top
 Profile  
 
dcuke
PostPosted: Wed Jan 04, 2012 11:08 am 
Jr. Member
Jr. Member

Joined: Sat Oct 30, 2010 7:59 pm
Posts: 95
Location: Visalia, California
@Dick,
I sent you an email about the prop that I have for an O-360. I also attached some pics of it.
Top
 Profile  
 
leewwalton
PostPosted: Fri Jan 06, 2012 8:05 am 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1715
Images: 107
Location: Houston, TX
Dick, This is worth looking into. The spinner alone sells for $425.

http://www.barnstormers.com/listing.php?id=621038

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD
Top
 Profile Personal album  
 
dickwolff
PostPosted: Fri Jan 06, 2012 4:30 pm 
Sr. Member
Sr. Member

Joined: Tue Nov 24, 2009 7:40 pm
Posts: 500
Images: 6
Location: Canada
Nice... but isn't 76" a bit long for a Thorp?
Top
 Profile Personal album  
 
leewwalton
PostPosted: Fri Jan 06, 2012 6:23 pm 
Administrator
Administrator
User avatar

Joined: Tue Oct 20, 2009 4:09 pm
Posts: 1715
Images: 107
Location: Houston, TX
Yes it is Dick, sorry didn't even look at the size of the prop .. the spinner would work on a thorp very well though.

_________________
Lee Walton
Houston, TX
N51863,N118LW
KEFD
Top
 Profile Personal album  
 
N89BJ
PostPosted: Mon Jan 09, 2012 11:24 am 
Rich Brazell wrote:
O0 AD prop. BN-3 spinner kit from Spruce...made for the Lycoming and fits the cowling, (you have to do the cut outs). If you need a crush plate and extension...Saber products. He even has the correct prop bolts. This is the package I used and have been very happy. Assuming you are looking for a wood prop ? ::) The spinner has tooling marks on it and will need polishing. Spruce can do the polishing for a price.

RB


Rich,
Just noticed your prop in the strobe light picture. So is your AD prop painted like a Hartzell or are you running a metal prop? Thanks.
Top
  
 
Rich Brazell
PostPosted: Mon Jan 09, 2012 6:41 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
Nope...AD wood prop painted gray, white tips and black on the back side. More than more person has asked me if it was a metal prop ! :o They don't know it's wood until I tell them. :))

RB
Top
 Profile Personal album  
 
N89BJ
PostPosted: Mon Jan 09, 2012 9:54 pm 
Rich, very nice.

Byron
Top
  
 
dan
PostPosted: Mon Jan 09, 2012 11:36 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Hey Rich, now I got several folks convinced that my prop is Metal, if you keep tellin folks they are wood, it's going to completely undo my story on organic aluminum!!! Dan
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 17 posts ]  Go to page 1, 2  Next

Board index » Classifieds » Parts

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

[ Time : 0.150s | 11 Queries | GZIP : On ]