Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Thu Oct 31, 2024 7:14 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
Magiver2
 Post subject: Newbie ramblings
PostPosted: Mon Jun 25, 2012 11:48 pm 
Newbie
Newbie

Joined: Fri Jun 15, 2012 9:38 am
Posts: 7
Hello to everyone out there in Thorp land. I am new to this forem and have already learned a great deal from reading your posts. My project is still on the trailer in my garage. Not sure yet but it appears that I may have enough parts to build more than one aircraft. The workmanship appears to be very good to my newbie eyes. I will be using a 0-290G engine as I think I have enough parts to build 3 or 4 of them. My plan is to build light and simple. I am located in Fresno Ca. and hope to hear from other builders or owners of Thorps in the area so I can pick your experiance but will try not to be a pest. I have been wanting build for years and now it looks like its time to dust off the rivet gun.

Best wishes to all
Phil Cantrell


Top
 Profile  
 
SHIPCHIEF
 Post subject: Re: Newbie ramblings
PostPosted: Tue Jun 26, 2012 12:29 am 
Sr. Member
Sr. Member

Joined: Tue Nov 29, 2011 9:05 pm
Posts: 471
Location: USA
Welcome Phill!
I'm a newbie too. I just got a T-18 in April. I have about 12 landings in it.
WHAT a Kick!


Top
 Profile  
 
admin
 Post subject: Re: Newbie ramblings
PostPosted: Tue Jun 26, 2012 9:39 am 
Administrator
Administrator

Joined: Tue Oct 20, 2009 2:21 pm
Posts: 176
Location: USA
Welcome to the world of Thorp's........now get building, you will enjoy the project and the plane.

*** admin posted for Bill Williams ***


Top
 Profile  
 
dan
 Post subject: Re: Newbie ramblings
PostPosted: Tue Jun 26, 2012 5:21 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Hi Phil!!!! Welcome!! We have a Throrp Air Command Wing here in Visalia, we are 3 strong and 2Birds have the 0290. There are a good number of Thorps in California, all good Folks. Which Field are you on in Fresno??? Dan


Top
 Profile  
 
Magiver2
 Post subject: Re: Newbie ramblings
PostPosted: Tue Jun 26, 2012 6:11 pm 
Newbie
Newbie

Joined: Fri Jun 15, 2012 9:38 am
Posts: 7
Dan
I am currently flying out of my garage. My project is far from flyable but as soon as I get an inventory of what I have and what I need I'll be building. I am looking forward to meeting you and David. Let me know if you guys meet on some sort of schedule.
Thanks for your response.
Phil


Top
 Profile  
 
Rich Brazell
 Post subject: Re: Newbie ramblings
PostPosted: Tue Jun 26, 2012 6:43 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3104
Images: 64
Location: Jamul, CA (San Diego area)
If the KVIS Fly In is still on for Sept. there will be a butt load of us there to give "advice." ::) KFAT is only about an 30 minute drive ? C:-)

RB


Top
 Profile Personal album  
 
dan
 Post subject: Re: Newbie ramblings
PostPosted: Tue Jun 26, 2012 10:29 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
OOPS, that's right Phil, KVIS, I am thinking its going to be just about Sept 15th&16th, and of coarse there will be the early arrivals that will be wheels down on Friday. Plan on that one Phil,we will have a time.....Dan


Top
 Profile  
 
davem
 Post subject: Re: Newbie ramblings
PostPosted: Wed Jun 27, 2012 8:58 am 
Jr. Member
Jr. Member
User avatar

Joined: Thu Oct 22, 2009 9:27 am
Posts: 56
Location: USA
Sept 15-16 is also the same date as the Reno Air Races. That is where I will likely be.

_________________
Dave M
Sacramento
ex-T-18 owner


Top
 Profile  
 
dan
 Post subject: Re: Newbie ramblings
PostPosted: Wed Jun 27, 2012 2:30 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 9:30 am
Posts: 898
Images: 0
Location: USA
Yep, races on the 15th 16th, we will be making a formal announcement before too much longer to try to give folks a heads up. We will have to see what is going on on the other weekends but we will without a doubt schedule it when some will have other obligations and thats ok and very understandable....Dan


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron

[ Time : 0.103s | 11 Queries | GZIP : On ]