Thorp Air Command - T18.net

Supporting Owners, Builders and Pilots of the Thorp T-18 and its variants.
It is currently Sun Dec 22, 2024 5:12 am

View unanswered posts | View active topics


Board index » Technical Info » Powerplant

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 25 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
3Dreaming
 Post subject: Re: MMO in an engine
PostPosted: Sun Feb 17, 2013 9:44 am 
Newbie
Newbie

Joined: Thu Mar 31, 2011 3:55 pm
Posts: 2
Location: USA
James Grahn wrote:
Yeah I did that to the one that failed a few years ago. So here is what I learned today. Compression testers go bad!,! We used two different testers and got two different results. I finally used the spark plug fitting off the second tester with the valves and gauges off the first. The results were much better. Then I changed to O rings on both and did it again. My final results are fly able. I am now at 67,72, 74, 71!! That is a fair sight better than yesterday morning. Whew! Thanks for all the help guys.
Cubes


He must have grabbed the tester that they use when things are slow in the shop. >:D
Top
 Profile  
 
James Grahn
 Post subject: Re: MMO in an engine
PostPosted: Mon Feb 18, 2013 1:37 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
It was the same tester I used last year. In fact, the last time the tester was used was on my engine! Go figure.
Cubes
Top
 Profile Personal album  
 
jrevens
 Post subject: Re: MMO in an engine
PostPosted: Mon Feb 18, 2013 1:54 pm 
Sr. Member
Sr. Member
User avatar

Joined: Thu Oct 22, 2009 10:13 pm
Posts: 789
Location: USA
Sounds like it was the spark plug hole adapter, & not the "tester" per se. I'm sure glad you're engine's OK Cubes!

_________________
John Evens
Arvada, Colorado
T-18 N71JE (sold)
Kitfox 7 SS N27JE


Top
 Profile  
 
James Grahn
 Post subject: Re: MMO in an engine
PostPosted: Mon Feb 18, 2013 3:10 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
On one it was the adapter or the hose that connects it. On the other, it was the gauges. I used the adapter from the second with the gauges from the first.
Cubes
Top
 Profile Personal album  
 
Rich Brazell
 Post subject: Re: MMO in an engine
PostPosted: Mon Feb 18, 2013 7:31 pm 
Hero Member
Hero Member

Joined: Wed Oct 21, 2009 12:33 pm
Posts: 3108
Images: 64
Location: Jamul, CA (San Diego area)
I guess that's why we sent torque wrenches , tire pressure gauges and other tools to the calibration shop to see if they were in specs . What kind of compression tester is it ? Brand name/company .

RB O0
Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: MMO in an engine
PostPosted: Tue Feb 19, 2013 4:36 pm 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
Dunno. Ill look Saturday.
Cubes
Top
 Profile Personal album  
 
Brent Schultz
 Post subject: Re: MMO in an engine
PostPosted: Fri Mar 01, 2013 10:44 am 
Full Member
Full Member

Joined: Fri Oct 23, 2009 12:23 am
Posts: 100
Images: 19
Location: USA
I have been told to never put MMO in the oil. We are approaching 1000 hours on N6CM. All cylinders are 70psi.
Top
 Profile Personal album  
 
James Grahn
 Post subject: Re: MMO in an engine
PostPosted: Fri Mar 01, 2013 11:20 am 
Hero Member
Hero Member

Joined: Sat Oct 24, 2009 7:16 pm
Posts: 1462
Images: 0
Location: USA
That's the first I've heard of that. Mine are all about 70 as well. Not sure what it can do wrong. But I may stop for a while and re-borescope after a few hundred.
Cubes
Top
 Profile Personal album  
 
Brent Schultz
 Post subject: Re: MMO in an engine
PostPosted: Fri Mar 01, 2013 1:33 pm 
Full Member
Full Member

Joined: Fri Oct 23, 2009 12:23 am
Posts: 100
Images: 19
Location: USA
Google MMO and/or TCP and you will find good articles about them both. I have been told MMO should only be used in the fuel. Never in the oil from people who have been using it for many years. We use half of the recommended amounts shown on the MMO container. I have been told MMO was made in WWII for the big recepts to help them with carbon buildup problems in the cylinder heads. I here in the oil it changes the viscosity and you do not want that. In any event, I have only mixed it in with fuel and our 1000 hour 0-290G does not burn oil, has good oil and cylinder pressures.
Top
 Profile Personal album  
 
Jim Mantyla
 Post subject: Re: MMO in an engine
PostPosted: Fri Mar 01, 2013 2:05 pm 
Sr. Member
Sr. Member

Joined: Wed Oct 21, 2009 6:57 pm
Posts: 232
Location: Barrie, Ontario,Canada
Guys,
When I had my Stinson 108-3 with the 165 Franklin using MMO was a must in the gas. It apparently lubricated the valve stems and kept them from sticking due to lead build up. I never put in tin the oil though. I used it over the course of about 8 years and never had a valve stick. I know a few C150 owners that also use it for the same purposes now that we can only get 100LL in this area.

Jim
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 25 posts ]  Go to page Previous  1, 2

Board index » Technical Info » Powerplant

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 19 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

[ Time : 0.122s | 11 Queries | GZIP : On ]